Two Hog on the same Network

Hi,
A freind start a new tour next month and had choose two hog III, one for the moving lights and other one for video and Laser control.

He will use the two hog on the same network with the same show,
Is there a way to control just moving lights with hog 1 and just video and laser with hog II?
is there a way during the show to quickly control all with the same hog?This is his firts questions, i will come back soon :D

Thanks
Steph
Parents
  • 0
    Yes, all DP's are on the server, and every operator can access all fixtures. On one show I and the other operator were programming the same fixture at the same time into seperate cuelists. I was working on a color chase, and he was doing pan/tilt work.

    Currently, you cannot have access levels as to who can and cannot control different areas of the desk or fixtures. This is a feature that will most likely show up on a future release.
Reply
  • 0
    Yes, all DP's are on the server, and every operator can access all fixtures. On one show I and the other operator were programming the same fixture at the same time into seperate cuelists. I was working on a color chase, and he was doing pan/tilt work.

    Currently, you cannot have access levels as to who can and cannot control different areas of the desk or fixtures. This is a feature that will most likely show up on a future release.
Children
No Data
Related

www.etcconnect.com