i loose my user fixtures in new shows

we have some LED par cans chinesse brand in our country and the library doesn´t have these fixtures loaded in.
so, i went to "built fixtures" and edit it from and existing fixture (the american dj LED par can) and works OK.
but when i load a new show the fixture is gone and i have to do all the process again
my question is... how do i keep any new fixture i create on the user fixtures option of the pacht menu? so if i made any new fixture, it apeear on any new show its loaded on the board.

thank a lot
Parents
  • 0
    Hi Gianfranco,

    Apologies for the delay as I've only just seen this thread.

    Please find attached a revised library for the Par LED SPD-015 fixture. This revision has been written to the details you have supplied above. I have assumed that the Intensity channel is 0-255 = Intensity 0-100% and that the Strobe channel is 0-255 = Strobe Slow-Fast.

    Please let me know if this is not correct, or you have any troubles using this revised library.

    Thanks,

    Steve
Reply
  • 0
    Hi Gianfranco,

    Apologies for the delay as I've only just seen this thread.

    Please find attached a revised library for the Par LED SPD-015 fixture. This revision has been written to the details you have supplied above. I have assumed that the Intensity channel is 0-255 = Intensity 0-100% and that the Strobe channel is 0-255 = Strobe Slow-Fast.

    Please let me know if this is not correct, or you have any troubles using this revised library.

    Thanks,

    Steve
Children
No Data
Related

www.etcconnect.com