i loose my user fixtures in new shows

You need to merge those fixtures from one show to the other. See a few posts down forums.highend.com/showthread.php?t=4608.

Also I'd recommend making a request to the boys to make an official profile for you in Library Requests.

thanks jess

i,ve find out this is the only way to have my created fixtures in future shows... Boring!
i already told the guys in HS about this fixtures and they have created the personality... but is kind of wrong and i have to edit it again
the personality in in "custon - par LED spd 015"

there are to much parameters on the file and i have to edit all chanels to use this propertly.
when i´m in front of my board i´ll copy the correct parameters to put those in this forum, cause this chinesse guys are, i believe, all over latin america by now. the brand is NIGHTSUN

Gianfranco,

Please email us the details of what is wrong in the library and we will be happy to make the corrections.

thanks,

OK

today i have a show and i´ll check all the wrong and rigth parameters and e-mail to you guys...
the brand name of this is NIGHTSUN.
they also have some LED tube, (kind of VERSA TUBE, but no video. only RGB lighting) they use 5 chanels. i´ll find out the manual and will scan it to send you so you can try to build the personalityc for this as well.

my best regards from lima, peru and thank you for the atention

Gianfranco,

To make things easier until we get these fixtures added to the Wholehog fixture library, you could create a new show, create or merge the fixtures you need, create any generic palettes that you use in all of your shows, then back up this show file. You can then load this backup as your starting show whenever you go out to program a new show so that you don't have to merge your custom fixtures and create your basic palettes every time.

I hope this helps.

thank you Tom

this is exactly what i´ve being doing since we got those fixtures.

the library named PAR LED SPD 015 lacted in the custom file Has to many parameters
i´ve found that this luminaries work ok whit this

1 intensity only
2 strobe only
3 red - as intensity
cyan
4 green - as intensity
magenta
5 blue - as intensity
yellow

than you guys again and i´ll be troubeling you again when i get stuck in any feature whit the hog

Hi Gianfranco,

Apologies for the delay as I've only just seen this thread.

Please find attached a revised library for the Par LED SPD-015 fixture. This revision has been written to the details you have supplied above. I have assumed that the Intensity channel is 0-255 = Intensity 0-100% and that the Strobe channel is 0-255 = Strobe Slow-Fast.

Please let me know if this is not correct, or you have any troubles using this revised library.

Thanks,

Steve