iPC 3rd Touchscreen issue

Hi All,

Hog iPC
XPe Image 8.0.5
v2.2.2

I've read other threads on this but I need to throw my hat in to the ring. My 3rd Mnitor, (an ELO 17" touchscreen) connected to the DVI output using a DVI to VGA adapter loses it's touch capability shortly after it's been configured. I've tried the workarounds noted in other threads to get the monitor to function and for the most part that works. I get display. I can move windows in and out of it. I get touch response and can select using the mouse. Within minutes, 3 or less, it loses it's touch. Display remains and I can move windows and use the mouse but, no touch. Also, in Control Panel>Displays the 3rd monitor disppears from the monitor list. Ideally, It should work all the time every time, no? Any help would be greatly appreciated.
Parents
  • 0
    If you can connect the third monitor and everything works for a certain amount of time before the touch becomes problematic then there is something funky going on with the touchscreen driver. Let's confirm the model number on the 17" Elo.

    In response to the 3rd monitor VGA issue also mentioned in this thread:
    We do have Hog3PC software in alpha test right now that fixes the third monitor display issue on bootup. It was fixed on the application level and did not require an XPE image to fix. Our next public software release will fix that issue.
Reply
  • 0
    If you can connect the third monitor and everything works for a certain amount of time before the touch becomes problematic then there is something funky going on with the touchscreen driver. Let's confirm the model number on the 17" Elo.

    In response to the 3rd monitor VGA issue also mentioned in this thread:
    We do have Hog3PC software in alpha test right now that fixes the third monitor display issue on bootup. It was fixed on the application level and did not require an XPE image to fix. Our next public software release will fix that issue.
Children
No Data
Related

www.etcconnect.com