If you are asking how to do this in your programmer with your data, then this is easy: select all your fixtures (1thru12) and put them in a position Press select on the toolbar and choose "even" hold the - (minus) key and turn the pan encoder
This will invert the pan value for half your fixtures.
if on the other hand you are referring to doing this in the patch window to invert the pan, then you can do either of the following: click and drag on the first half of the fixtures in the invert pan column and then press SET or click on the invert pan cell for each fixture you want to invert pan and press set.
If you are asking how to do this in your programmer with your data, then this is easy: select all your fixtures (1thru12) and put them in a position Press select on the toolbar and choose "even" hold the - (minus) key and turn the pan encoder
This will invert the pan value for half your fixtures.
if on the other hand you are referring to doing this in the patch window to invert the pan, then you can do either of the following: click and drag on the first half of the fixtures in the invert pan column and then press SET or click on the invert pan cell for each fixture you want to invert pan and press set.
