How select all, divid by 2 and invert pan?

Just a little thread to know if it's possible to do that :

I have 10 fixtures and i want to :

select all
divid my selection by 2
invert (only) the pan

and put all of this in a macro or button or...? to be more faster

thank's
Parents
  • 0
    quote :
    if you are asking how to do this in your programmer with your data, then this is easy:
    select all your fixtures (1thru12) and put them in a position
    Press select on the toolbar and choose "even"
    hold the - (minus) key and turn the pan encoder

    This will invert the pan value for half your fixtures.

    with this tip you can invert the pan fonction for one position but:

    how to keep this function activate to make a symetric tracking?
Reply
  • 0
    quote :
    if you are asking how to do this in your programmer with your data, then this is easy:
    select all your fixtures (1thru12) and put them in a position
    Press select on the toolbar and choose "even"
    hold the - (minus) key and turn the pan encoder

    This will invert the pan value for half your fixtures.

    with this tip you can invert the pan fonction for one position but:

    how to keep this function activate to make a symetric tracking?
Children
No Data

www.etcconnect.com