I am using WYSIWYG 21 on my laptop running HOG3PC 2.3.1 (b1932) with the WholeHog connectivity driver version 1.08. I have two DMX Widgets.
I run HOG3PC first and load my show. I then run WYSIWYG and the connectivity window pops up and shows Status: Running, a session address, and Info: Outputs Active. Port 6600 and User Number 1.
I have WYSIWYG set with two universes A and B. My conventionals are patched into A and my movers into B. I have a WholeHog III DP device added in the Device Manager and have bound universe A to Output 1 and universe B to Output 2 with the Address Field set to 1.
When I press Connect, I get a green dot below my System Tray Hog Icon and "WholeHog III DP: / " in the Live Module Status line of WYSIWYG.
However, no output. My Grand Master is up on the HOG. I have "connect on load" set in WYSIWYG and when I save the file and reload WYSIWYG I get the error message:
"Could not connect the following consoles: WholeHog III DP ; "
What am I missing?
