WH III DP2000 output problem....

Hey, I'm programming a show that uses some Studio Due CityColors, this fixture go to Open White intensity 100% if they recive no dmx...:confused:
My problem is that my DP2000 halt the DMX for a brief moment when i Merge into existing cues, create new cues, and some times even when I playback cues...:dunno: the result: the stage flashes bright for a moment. This does not happen all the time, but only once in a while?? I've tried to change the Dmx output speed of the DP2000 with no change...

Also I've notised the speed of the WH III decreases dramaticaly with the Output Window open, ive notised this since the upgrade to 2.6???

I am running a 2005 WH III the DP2000 is from 2005 aswell...

Thanks
Nicolai
Parents
  • 0
    I'm using only 1 DP2000, the WH III is DHCP Server, I guess, the DP2000 gets no IP before I boot up and start a show.... Today I'm trying out a DMX Merger, I'm putting it right in front of the Studio due's as they are the last on the line, my hope is that when ever the DMx from the DP2000 is out it will merge in a signel from another dmx source, and therefore no sudden flashes from the studios.

    I know this is not the right way of fixing the problem, but I nee da quick fix, before rehersals start in 2 days....
Reply
  • 0
    I'm using only 1 DP2000, the WH III is DHCP Server, I guess, the DP2000 gets no IP before I boot up and start a show.... Today I'm trying out a DMX Merger, I'm putting it right in front of the Studio due's as they are the last on the line, my hope is that when ever the DMx from the DP2000 is out it will merge in a signel from another dmx source, and therefore no sudden flashes from the studios.

    I know this is not the right way of fixing the problem, but I nee da quick fix, before rehersals start in 2 days....
Children
No Data
Related

www.etcconnect.com