Problems with iSpot color wheel alignment

probably because the fixture profile needs to be adjusted....Coemar is one of those companies where their published DMX charts rarely reflect actual fixture operation....:rolleyes: ....the easiest workaround is to simply dial in the wheel positions and create palettes.

Hope this helps:)

thx. i figured that might be the case, but i was hoping there'd be an easier solution. safe to assume the profile won't be updated anytime soon?

Well the profile guru, Steve, is very good about keeping up with these things as long as someone provides him with the info.

The best thing to do is note the actual DMX values for the colour/gobo slots and send him a list by posting in the Fixture Library section of the forum.

You can see the DMX by pressing SETUP & then DMX from the bottom right toolbar....then navigate to the universe where your fixtures are.

Hope this helps:)

[QUOTE=Marty Postma;29652]Well the profile guru, Steve, is very good about keeping up with these things as long as someone provides him with the info.

The best thing to do is note the actual DMX values for the colour/gobo slots and send him a list by posting in the Fixture Library section of the forum.

You can see the DMX by pressing SETUP & then DMX from the bottom right toolbar....then navigate to the universe where your fixtures are.

Hope this helps:)

did anyone figure this out. man having the same issue
thanks