Read a little about other users using XKeys and decided to give it a try. I'm using Hog 3PC. First thing I programmed was 100 to run a cue list. When I hit the XKeys button, I See "List 100 Set" on the command line which doesn't exactly do what I expected. I'm not sure if it's related but I've seen something similar before when I try to name a list and certain keys seem to still be mapped to the keyboard shortcut instead of the character. Any ideas?
If I'm remembering correctly, you just need to set the switch on the right side to program mode (red light should then blink). Press the key you want to program, press the key sequence on your keyboard, press the key on the xkey module to confirm it. Once you put the switch back into program mode, it should be good. Let me know if this works.
If I'm remembering correctly, you just need to set the switch on the right side to program mode (red light should then blink). Press the key you want to program, press the key sequence on your keyboard, press the key on the xkey module to confirm it. Once you put the switch back into program mode, it should be good. Let me know if this works.
