how to connect the wholehog3 with wysiwyg22

i would like to connect the wholehog 3 with wysiwyg 22
i used a hub
i connect the wholehog 3 and my pc on the hub
and after , i don't know what configuration for wholehog 3 and pc used
please help

Parents

0 marty postma - Former HES Forum Member over 16 years ago

Make sure that you have the Connectivity Driver installed.

Also make sure you have added a DP in WYG and that the patch in the Hog console matches the patch in WYG.

Then launch your show on the console, and after it is loaded, launch WYG and open your file.

There is much more info on this in both the Hog manual and the WYG help tab.

Hope this helps:)
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Reply

0 marty postma - Former HES Forum Member over 16 years ago

Make sure that you have the Connectivity Driver installed.

Also make sure you have added a DP in WYG and that the patch in the Hog console matches the patch in WYG.

Then launch your show on the console, and after it is loaded, launch WYG and open your file.

There is much more info on this in both the Hog manual and the WYG help tab.

Hope this helps:)
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Children

No Data