B2417 - Artnet settings lost...

I have had this issue 2 days in a row now on startup and am very confused...

H3
Exp. Wing
Playback Wing
DP8000
DP2000 (Artnet Mode)

Console upon startup goes through setup and, when finished booting, triggers startup macro without problem. However, there is no console output.

I open the DP8000 window and go to settings and all of the Artnet Settings are reset of default and OFF.

This has happened twice now. Standard shutdown procedures are followed everyday. Yesterday when it happened, the console had been off since Thursday. Today, the console was only off overnight. The DP8000 and DP2000 are not shutdown.

Could this be a fault of a BIOS battery going bad?
Parents
  • 0
    Definately not BIOS battery related. On the HogIII the only thing that the battery does it keep the time of day clock running when the power is off.

    Did the DP8000 lose all of its settings, or just the Art-Net portion?

    It's possible the failsafe boot was triggered, but that would set everything to default, not just the Art-Net settings.

    Please verify that you're running the release version of 3.0.0 and not a beta version. There was an bug that could cause this exact behaviour that fixed very late in the beta cycle.
Reply
  • 0
    Definately not BIOS battery related. On the HogIII the only thing that the battery does it keep the time of day clock running when the power is off.

    Did the DP8000 lose all of its settings, or just the Art-Net portion?

    It's possible the failsafe boot was triggered, but that would set everything to default, not just the Art-Net settings.

    Please verify that you're running the release version of 3.0.0 and not a beta version. There was an bug that could cause this exact behaviour that fixed very late in the beta cycle.
Children
No Data
Related

www.etcconnect.com