ipc hog 3 color changing issues please help.

I am having issues with the clr changing functions in hog 3 on the ipc.

when changing from magenta on the mixing flags to cyan, the fixture (mac 2000 wash and mac 2000 profile) on the mixing flags, it go's through white.

some clrs on the mixing flags are jumping or ignoring the default cue fade times.

is this the path, they are on default linear.

is it the console, ipc running hog 3

or is it the fixture, mac 2000 wash and profile in 16 bit.

I have just moved over from hog 2 to 3 and have never seen or had this problem in hog 2 mode.

please help.
Parents
  • 0
    You may have a problem with your fixtures....I do smooth crossfades on the Mac-2ks all the time.

    It also might be where you have your values set. For example if you have your cyan in at 50% and you change to magenta at 25% and set them both to move in the same time.....you are going to get something that looks like white inbetween because of the distance to time relationship that you have set......doesn't matter what the console is the results will be the same in this case.

    Hope this helps:)
Reply
  • 0
    You may have a problem with your fixtures....I do smooth crossfades on the Mac-2ks all the time.

    It also might be where you have your values set. For example if you have your cyan in at 50% and you change to magenta at 25% and set them both to move in the same time.....you are going to get something that looks like white inbetween because of the distance to time relationship that you have set......doesn't matter what the console is the results will be the same in this case.

    Hope this helps:)
Children
No Data
Related

www.etcconnect.com