This should be simple, but I can't seem to figure it out. If I have a cuelist set to run a cue with the fader or flash button, how can I preset that cue in the stack without actually running the cue until I bring up the fader or hit the flash button? I'm looking for a button option similar to Go, but without actually executing the cue, just queuing it up in the stack to run the next time I hit the flash button or bring up the fader. I know about GoTo, but I'm looking for something even simpler.
Sounds like you might want to look at "+GO off zero"
That way, when you just tap the fader to 1%, it runs the cue and then the fader or flash button is the intensity. You will probably also want "+ Release at zero" so when you pull it all the way down, it releases (maybe you don't want that though).
This is located in the "Options" of the list under "Master."
Sounds like you might want to look at "+GO off zero"
That way, when you just tap the fader to 1%, it runs the cue and then the fader or flash button is the intensity. You will probably also want "+ Release at zero" so when you pull it all the way down, it releases (maybe you don't want that though).
This is located in the "Options" of the list under "Master."
