Update from 2.6 to 3.0.5

Hello..

I have a show programmed in 2.6. If I upgrade to 3.0.5 , will my show be able to load onto the 3.0.5 version without any changes?


Thanks
Parents
  • Use "Clone DP" in the patch window.
    Setup:Patch:View By DP:Clone DP

    You can move universes around in blocks for 4 universes.

    Create two new DP2000s on Net numbers you're not using (for example 11 and 12)
    Clone the 8 universes you need to them.
    Delete the DP8000.
    Create two new DP2000s on Net Numbers 1 and 2
    Clone 11 and 12 to 1 and 2.

    Your show should then load properly on 2.x.

    I may have missed a few minor steps, but this should give you the basic idea.
Reply
  • Use "Clone DP" in the patch window.
    Setup:Patch:View By DP:Clone DP

    You can move universes around in blocks for 4 universes.

    Create two new DP2000s on Net numbers you're not using (for example 11 and 12)
    Clone the 8 universes you need to them.
    Delete the DP8000.
    Create two new DP2000s on Net Numbers 1 and 2
    Clone 11 and 12 to 1 and 2.

    Your show should then load properly on 2.x.

    I may have missed a few minor steps, but this should give you the basic idea.
Children
No Data
Related