There are running 2 DP2000 (these are running perfectly)
I’ve recently linkt up a DP8000, and want to test this device.
The DP8000 was running V3.0.0, I forced the DP8000 to load the V3.0.5 software by pressing the 3 buttons at once while powering the device. This works perfect.
The DP8000 is running V3.0.5 (shown in the control panel Hog 3V3.0.5(b2482))
The DP8000 loads the new software but I don’t can get it running.
The display on the DP8000 shows: Connecting, No server, scanning port 6600. 4 The LED near Hog-Net Link is flashing
On the back of the DP8000 the Link LED is on, and the Traffic LED is flashing. (Hog-Net Gigabit – Ethernet)
172.31.x.x and 169.254.x.x are different IP ranges and won't be able to communicate with each other. Try setting everything to 172.31.x.x and try again.
172.31.x.x and 169.254.x.x are different IP ranges and won't be able to communicate with each other. Try setting everything to 172.31.x.x and try again.