Issues with v3.1.0 on an iPC

I am using an iPC with the 3.1.0 release. After a while of having only the groups window and the patch window open, I was having bad slowdowns. Eventually it got really bad and I decided to restart the playback instance. When it came back up, both the Effects button and the Intensity button leds were lit. They were stuck on even though I could press any other one of the buttons and the software reacted but it wouldn't reflect the change. I rebooted the console and it was fine after that. (see pic attached.)

Second thing, I was trying to record some desk channels onto the fader that the grand master was on. (fader 1). It came up with a server busy error. Recorded it to the second fader and it went. (see pic) 1614

Third thing, Had some studio spots, adjusted their positions and tried to record to a position directory. Got a server busy error. Reboot fixed it and I was able to record to it after that. (see pic) 1634
Parents
  • 0
    At the time of the first slowdown, I only had the patch window open on the right screen, full screen, and the left screen had the groups open on the left half. I had the highlight key on, and I was clicking the far left selection cell to highlight them and record them into groups. Nothing special, maybe had one or 2 lists playing just conventionals at full for worklight. After a while, clicking on the selection cells began to become really slow. I would click it, it would grey a little bit then about 2 to 3 seconds later it would become blue. I tried closing it, but then the console became really slow to even just respond. Even keystrokes registering in the command line. So then I decided to reset the playback instance. I did not try flashing or playing/releasing any lists. There wasn't any effects running, only a list or 2 of just conventionals at full, nothing special.
Reply
  • 0
    At the time of the first slowdown, I only had the patch window open on the right screen, full screen, and the left screen had the groups open on the left half. I had the highlight key on, and I was clicking the far left selection cell to highlight them and record them into groups. Nothing special, maybe had one or 2 lists playing just conventionals at full for worklight. After a while, clicking on the selection cells began to become really slow. I would click it, it would grey a little bit then about 2 to 3 seconds later it would become blue. I tried closing it, but then the console became really slow to even just respond. Even keystrokes registering in the command line. So then I decided to reset the playback instance. I did not try flashing or playing/releasing any lists. There wasn't any effects running, only a list or 2 of just conventionals at full, nothing special.
Children
No Data
Related

www.etcconnect.com