hey guys, i am running into a problem. This past weekend i used the road hog at our church to run a concert. 2 hours before the show started i doused the lamps on my intels (6 design spot 575, and 2 design spot 250s). When i went to strike them from the console before the concert everything struck just fine, however, when i hit clear it doused them again. Now the only way to turn the lamps on with out them dousing is to not hit clear. any thoughts?
I don't think fade changes is the culprit, as with those Elation fixtures, the Lamp OFF function has a higher DMX value than the Lamp ON function. Try making a cuelist that only lamps on the fixtures and see if you get the same problem when you release the cuelist.
My other advice is to not lamp off fixtures before a show!
I don't think fade changes is the culprit, as with those Elation fixtures, the Lamp OFF function has a higher DMX value than the Lamp ON function. Try making a cuelist that only lamps on the fixtures and see if you get the same problem when you release the cuelist.
My other advice is to not lamp off fixtures before a show!
