• State Not Answered
  • Date
    TBS Lighting
  • Date
  • Replies 30 replies
  • Subscribers 5 subscribers
  • Views 3496 views
  • Users 0 members are here

Wholehog III & WYG Connectivity

Trying to interface the Wholehog III to a Wyg computer. With the Hog III not connected the Hog Connectivity wizard just says searching for Hog network and WYG works a fine as it should.

When I connect the computer to the Hog and then launch WYG, it get a error code 998 when I open a WYG file and WYG chasers. I have the Hog and the WYG computer connected to a DHCP network and using static IP addresses. The Hog console is set to boot server only.

Same subnet, same gateway and DNS for both. No firewall or AV. I have tried both the same user number as the console or different one and neither seems to make a difference.

I have deleted the Hog Connectivity and reinstalled it. It doesn't help.

Any thoughts? What is error 998 and why does connecting the Hog Cable crash WYG?

Thanks.


Travis Slyter
Ruehling Associates, Inc.
Parents
  • 0
    Make sure that ALL other network connections are disabled on your WYG computer (WiFi etc...).

    There is currently no good way to tell the connectivity driver which network adapter to use, so it may be "looking" at the wrong one.

    There was an older version of the connectivity driver that would crash WYG if you made certain changes to your showfile, but it never prevented connection in the first place. Make sure your console and connectivity driver versions are the most current ones and that the build numbers match.

    Hope this helps. :)
Reply
  • 0
    Make sure that ALL other network connections are disabled on your WYG computer (WiFi etc...).

    There is currently no good way to tell the connectivity driver which network adapter to use, so it may be "looking" at the wrong one.

    There was an older version of the connectivity driver that would crash WYG if you made certain changes to your showfile, but it never prevented connection in the first place. Make sure your console and connectivity driver versions are the most current ones and that the build numbers match.

    Hope this helps. :)
Children
No Data
Related

www.etcconnect.com