Wholehog III & WYG Connectivity

Trying to interface the Wholehog III to a Wyg computer. With the Hog III not connected the Hog Connectivity wizard just says searching for Hog network and WYG works a fine as it should.

When I connect the computer to the Hog and then launch WYG, it get a error code 998 when I open a WYG file and WYG chasers. I have the Hog and the WYG computer connected to a DHCP network and using static IP addresses. The Hog console is set to boot server only.

Same subnet, same gateway and DNS for both. No firewall or AV. I have tried both the same user number as the console or different one and neither seems to make a difference.

I have deleted the Hog Connectivity and reinstalled it. It doesn't help.

Any thoughts? What is error 998 and why does connecting the Hog Cable crash WYG?

Thanks.


Travis Slyter
Ruehling Associates, Inc.
Parents
  • Thanks for the replies. Hog ver. 3.1.6. Connectivity version 2773. Wyg R25. Win XP Pro 32-Bit.

    I've had issues in the past with newer versions of the Connectivity driver so I've had to back down in versions and that seem to help. This time it didn't help, so I went back to the current version.

    I will try making sure that I have the other connections disabled. I am going to also swap out Hog IIIs and see if that makes a difference.

    Thanks.


    Travis Slyter
    Ruehling Associates, Inc.
Reply
  • Thanks for the replies. Hog ver. 3.1.6. Connectivity version 2773. Wyg R25. Win XP Pro 32-Bit.

    I've had issues in the past with newer versions of the Connectivity driver so I've had to back down in versions and that seem to help. This time it didn't help, so I went back to the current version.

    I will try making sure that I have the other connections disabled. I am going to also swap out Hog IIIs and see if that makes a difference.

    Thanks.


    Travis Slyter
    Ruehling Associates, Inc.
Children
No Data
Related