Wholehog III & WYG Connectivity

Trying to interface the Wholehog III to a Wyg computer. With the Hog III not connected the Hog Connectivity wizard just says searching for Hog network and WYG works a fine as it should.

When I connect the computer to the Hog and then launch WYG, it get a error code 998 when I open a WYG file and WYG chasers. I have the Hog and the WYG computer connected to a DHCP network and using static IP addresses. The Hog console is set to boot server only.

Same subnet, same gateway and DNS for both. No firewall or AV. I have tried both the same user number as the console or different one and neither seems to make a difference.

I have deleted the Hog Connectivity and reinstalled it. It doesn't help.

Any thoughts? What is error 998 and why does connecting the Hog Cable crash WYG?

Thanks.


Travis Slyter
Ruehling Associates, Inc.
Parents
  • More than likely it's one of two things. Check two things.

    Make sure that ALL other network connections are disabled on your WYG computer other than the one you are connecting to your console through. This includes bluetooth as well. And also check that the network adapter you do decide to you has a valid IP address that is compatible with the IP address you are using on your console.

    Also make sure there aren't any stray WYG.exe processes running under the processes tab of the windows task manager.
Reply
  • More than likely it's one of two things. Check two things.

    Make sure that ALL other network connections are disabled on your WYG computer other than the one you are connecting to your console through. This includes bluetooth as well. And also check that the network adapter you do decide to you has a valid IP address that is compatible with the IP address you are using on your console.

    Also make sure there aren't any stray WYG.exe processes running under the processes tab of the windows task manager.
Children
No Data
Related