Problems with my baby3

Hi everyone.
I´m new here, and i need some help with my hog3.
I´m starting to program a new show, and suddenly my hog3 started to have problems.
I start the console, and a few minutes later, both screens go off.It looks like it´s only a problem with the screens, because the playback wing still change the chooses, and the image in the external screens is good. 3 or 4 minutes later, all the chooses of the console start blinking, and the console is completely off.
I have change the power, because i´m at home programming, and i have a lot of things conected. I thought it could be power problems. No it isn´t.
I´ve disconected the expansion, the external monitors, also the ethernet cable, and keep failing.
Right now, i have the console open. I did some preasure on all the conections thinking in some conections failure. I have the console running, and it looks good, but... i´m afraid because if it is a real problem, it will appear again.
I´m running 3.1.6 (2773), but i don´t think it´s a software problem.

Thank you very much.
Parents
  • 0
    Thank you everybody.
    I think i´ve resolve the problem.
    When i send the console to change the screen, i saw when it comes back, the hole existing betwen the screen and the front pannel. I thought it was too big and i tried to cover it with something. I put a small pieces of foam leaving it free os dust, sand of the bullfighting rings ( the tours in Spain is full of these fucking places) and sheet in general.
    After yesterday nightmare i have spend all night thinking in what could be the problem of my console. this morning i woke up with the last oportunity of repairing it. Taking away these pieces of foam.
    The console is working perfect since this moment, and finally i can program my show.

    Thanks again for your help.

    Bill
Reply
  • 0
    Thank you everybody.
    I think i´ve resolve the problem.
    When i send the console to change the screen, i saw when it comes back, the hole existing betwen the screen and the front pannel. I thought it was too big and i tried to cover it with something. I put a small pieces of foam leaving it free os dust, sand of the bullfighting rings ( the tours in Spain is full of these fucking places) and sheet in general.
    After yesterday nightmare i have spend all night thinking in what could be the problem of my console. this morning i woke up with the last oportunity of repairing it. Taking away these pieces of foam.
    The console is working perfect since this moment, and finally i can program my show.

    Thanks again for your help.

    Bill
Children
No Data
Related

www.etcconnect.com