Problem with strobe

Okay this probably has a simple solution, and Im just not seeing something.

I have a template page with a pretty standard strobe cue of Int=100 Rate=10hz Length=0

when I try to make a separate cue with max length (for a blinding look), it changes the first cue to the same settings. Even if the new cue is released.

And then if I delete the new cue, the original cue only blinks the strobe once, but after a while goes back to what was originally programmed...

Im using a Road Hog FB with pretty new softawre and the strobes are Martin Atomics in mode 4.

Thanks for the help!
Parents
  • 0
    OK.
    What cuelist and fader/flash-key options are you using?
    Fade times? Release/Assert Times? (I assume zero for all).

    Try making sure that the ONLY options you are using are:
    - Persist on Override
    - Priority "0"
    - Both Flash Key and Fader "+Go" & "+Release" (No Solo or Latching for Flash Key....Fader should be "I Fader")

    Hope this helps. :)
Reply
  • 0
    OK.
    What cuelist and fader/flash-key options are you using?
    Fade times? Release/Assert Times? (I assume zero for all).

    Try making sure that the ONLY options you are using are:
    - Persist on Override
    - Priority "0"
    - Both Flash Key and Fader "+Go" & "+Release" (No Solo or Latching for Flash Key....Fader should be "I Fader")

    Hope this helps. :)
Children
No Data

www.etcconnect.com