Anyone interested in OSC control??

So, as you know, I like to play with different controls for the Hog (iPhone, iPad, etc) and recently discovered the uses of OSC control.

I've been using OSCTouch for the iPhone and iPad. On top of that, I've been using OSCulator to transcode the OSC commands into MIDI notes. Would anyone be interested in playing with this setup????

The nice thing is that is DOES NOT require running Hog3PC as a client. There are options for both PC and MAC. I have an EMU USB->Midi box on my MAC and it connects MIDI directly to the console. You do have to be on the same network between the MAC and iPad/iPhone.

[ATTACH]2097[/ATTACH]

[ATTACH]2098[/ATTACH]

[ATTACH]2101[/ATTACH]

0 visualrhythm - Former HES Forum Member over 13 years ago

is this for hog2pc or hog3 pc? do u have an updated midimap for the hog2pc I would like to use touchosc with hog2pc.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 jxgriffi - Former HES Forum Member over 13 years ago

VisualRhythm,

It is currently coded for Hog3PC. I have not used Hog2PC in about 7 years. If you want to download my Hog3 TouchOSC screen, you can use their free editor and change the labels and MIDI notes as needed. It's not difficult at all with the creation of the TouchOSC editor.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 visualrhythm - Former HES Forum Member over 13 years ago

jxgriffi,

do u have a list of all the midi commands and their function for the hog 3?
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 jxgriffi - Former HES Forum Member over 13 years ago

They were in the release notes for 3.1.7.

www.flyingpig.com/support/downloads/releasenotes/Wholehog_v3.1.7_b2826_Release_Notes.pdf
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 jxgriffi - Former HES Forum Member over 13 years ago

This is getting even more fun...

Found a new product that seems to fill a void for some people. This will get rid of the PC between the console and iPad/iPhone/Android whatever.

www.wifimidi.com

The Missing Link creates an ad-hoc wireless network between the device and the Midi output. So, no computer needed to control things. The other thing that the Missing Link allows is MIDI SYSEX messages instead of just notes and/or control changes. This opens up a WHOLE different set of abilities with the consoles.

Just wanted everyone to know what was out there...I'm thinking about ordering one and see where I can take this TouchOSC template to next with SYSEX messages. :)
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 abbe rpm digital lighting - Former HES Forum Member over 13 years ago

Hi,

I got one of those, works great :) But since i am not a iPad/Phone owner i can not test your nice work.
My tests are done with Android, but for now there is no app that suits what i want to do.

Better hurry to buy, they only made 100 units in the first run... ;)
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 dandeacon - Former HES Forum Member over 13 years ago

Hi Jon, is TouchOSC work multi-touch with the hog 3pc? I'm a little confused about the limitations of all the parts.
All I really want to do is use an ipad for my faders, but understand that isn't possible. However, can you multi-touch flash buttons etc.

Thanks
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 visualrhythm - Former HES Forum Member over 13 years ago

What can sysex messages do with Hog 3PC? There are a couple of options with routing midi. I'm thinking about creating some videos to show a few. I've been using touch osc since 2007/8 with mostly with light jockey. I really wish High end would allow CC messages for encoders and faders, that and the wings should come with widget built in like the maxxyz ones.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 marty postma - Former HES Forum Member over 13 years ago

[QUOTE=VisualRhythm;54744]....the wings should come with widget built in....

FYI - the RoadHog Wings have the option of a built in Superwidget for (x4) DMX Universes.

Hope this helps. :)
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 visualrhythm - Former HES Forum Member over 13 years ago

[QUOTE=Marty Postma;54755]FYI - the RoadHog Wings have the option of a built in Superwidget for (x4) DMX Universes.

Hope this helps. :)

I saw that, but when you compare price, the maxxyz wings start to look more appealing.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 marty postma - Former HES Forum Member over 13 years ago

[QUOTE=VisualRhythm;54756]I saw that, but when you compare price, the maxxyz wings start to look more appealing.

Appealing......until you realize that it's a maxxyz......;):D
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 nibor over 13 years ago

Wow,,, I actually feel the same way as someone on the forums, I've run that thing
it fails to the 3
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 hrrrd - Former HES Forum Member over 13 years ago

so, sorry for the dumb question, but...

everything is set up, iPad is connected to rtpmidi, HogPCs midi notes are done. now, how do I connect the two (everything on one PC)? so at the moment it goes iPad > rtpmidi > ??? > HogPC
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 jxgriffi - Former HES Forum Member over 13 years ago

everything is set up, iPad is connected to rtpmidi, HogPCs midi notes are done. now, how do I connect the two (everything on one PC)? so at the moment it goes iPad > rtpmidi > ??? > HogPC

First you need to make sure that the iPad is sending it's notes to the computer. There are solution out there (midiox, etc.) that will let you look at the MIDI signal coming in.

If it is indeed making it to the computer, make sure the Hog3PC is actually looking for the Midi notes (MIDI Notes IN button is clicked) and is on the right channel.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 benwin over 13 years ago

jxgriffi I love your setup, wish I had thought of using midi as a remote earlier, I use it mainly for doing on stage focuses so I have recorded a macro (at Last!) to move the pan encoder +1 and another for -1 then repeated for the tilt encoder, its ok for touching up focuses but might be tiresome for starting from scratch, I guess you could always add a +/- 5,10 etc.

Anyway just a suggestion

Ben
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel