Wifi Hog3PC and iPC on 3.2 issue

I open a new Thread, becouse i dont get Wifi (RFU) running...here is the old Thread:
(i connected iPC 3.2. and Hog3PC 3.2. as i usually did all the time before
3.2 HogPC as RFU ...it takes much longer to connect to iPC Show, but i can launch...after a while (different, some minutes ) and some button action Hog3PC crashes, in Networkwindow on iPC i can see that the PC node is alternating to offline/online before it crashes...
There is no difference if i use same or other Netnumber, IPC is Server.
i did not change any configurations in my Network prefs (Firewall off)

Hog3PC runs on XP SP2, Apple Airport Express

Never had any issues before...
Any Hints?
Thanks
Marc

It works hardwired , no crash since 30min ,..is it possible that it is a Wifi issue with 3.2? The config of Airport has not changed since 3.1.9)

The connection is very unstable via Wifi and Hog3 PC crash after a few minutes. Its stable and work with Cable!

Marc
Parents
  • Thanks Marty,
    in this config, the iPC hands out the IP, i had it before all set to 172.31...(this was perfect with 3.1.9 ) ...i still have in all my trials with different IP configs dropouts...i mean, the Console and HogPC always connect, but after a while HogPC loses the Server (iPC). At the moment, i have no idea, what to do...and i will focus via Cat5

    Maybe, someone can give me a good working setup for this? (Apple Airport Express)
    Greets
    Marc
Reply
  • Thanks Marty,
    in this config, the iPC hands out the IP, i had it before all set to 172.31...(this was perfect with 3.1.9 ) ...i still have in all my trials with different IP configs dropouts...i mean, the Console and HogPC always connect, but after a while HogPC loses the Server (iPC). At the moment, i have no idea, what to do...and i will focus via Cat5

    Maybe, someone can give me a good working setup for this? (Apple Airport Express)
    Greets
    Marc
Children
No Data
Related