If you just want failover (console backup) put both on the same network, different net numbers and 'run server' on both.
If you want full tracking (chosen page, chosen master, playback state), put both on same network, and SAME net number. Only have to run one as server, but can do both if you wish.
[QUOTE=ShrunkenNed;58663]If you just want failover (console backup) put both on the same network, different net numbers and 'run server' on both.
If you want full tracking (chosen page, chosen master, playback state), put both on same network, and SAME net number. Only have to run one as server, but can do both if you wish.
Page 78 in the manual has further detail
Thanks, sadly I already tried these settings without luck, I don,t get the IPC and the Tablet to do full tracking, If I select a group on the tablet and @ full the IPC doesn,t even know its turned on and it can,t be cleared or recorded.
Hi, Here are the relevant pages from the manual which detail how to do this. Can you expalin your setup in more detail please. How is your network connected? Can you see the the Tablet in the network settings on your IPC console?
The programmer will be unique to each console regardless of the net number/setup. What you are asking to do "Select Group 1" on console 1 and then select "@ Full" on the tablet isn't possible.
