hog iPC: RAM upgrade

Hi there

i was wondering if it is possible that we could upgrade the RAM of our hog iPC...

i think it now has 512MB RAM installed, i would like to double that ammount (by inserting 2 512MB bars) to get our console a little more stable.

it looks like it that with the new software version the 512MB is not sufficient

any recommendations?

0 stagelites over 13 years ago

I upgraded mine. I did notice a definite performance increase. I looked at the motherboard and ordered the ram recommended for it.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 stephenwyker over 13 years ago

Does it improve the issues with the encoders on 3.2?
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 stagelites over 13 years ago

I don't recall actually. I put in 2gig of ram in the iPC, and while it takes longer to boot (Due to the ram checks etc), it seems to have a generally zippier performance. I notice it mostly during window redraws and changing to the control panel etc.

Right now it is is being used as a backup board, so it is not getting as much programming on it as it used to.

With ram so cheap, it's probably worth a try.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 marty postma - Former HES Forum Member over 13 years ago

[QUOTE=stephenwyker;59047]Does it improve the issues with the encoders on 3.2?

Biggest thing for iPC is to get the newest motherboard.
Older processors currently have some issues with current software.
The developers have been made aware, but I'm not sure if/when the issue will be resolved for older iPCs.

A RAM increase should have only a very minimal impact on performace.

Another thing to do is disable the Floppy drive (A: drive) in the BIOS.

There are several other recent threads here that discuss this.

Hope this helps. :)
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel