Mark Cues and other weirdness.

Hello All.

Running RHFB v.3.2.3 (b 3367)

I am having trouble with Mark cues on this version. Does not seem to matter what fixture type or brand so I do not think it is fixture library related.

If I program a split color into a cue It will playback fine unless I mark the cue. If the cue is marked it will playback as a solid color and not the split color. This also happens on certain gobos. It will playback as recorded unless marked. If marked it will pick the gobo in the previous slot.

Also new on this version, Having trouble with color pro FX. Unable to program twinkle wheel. The twinkle parameter cancels out the beamfx and vice versa. Worked fine in previous versions.

Thanks,

Kevin
Parents
  • 0
    [QUOTE=c_muenchow;59717]Kevin,

    I am not seeing the mark issue. Can you post what your cue structure is or send us your show file so we can see what you are seeing?

    Hi Chris, I sent you a copy of the show file, I did a lot of work around programming so I had to recreate a specific issue.

    If you run Cuelist 498 on page 19. Run cue 176, Look at Studio Spot 250's. They will be in aqua-50 when cue 177 completes. Then if you fire cue 178 they will revert to just aqua and lose the split color. It seems to be an issue in subsequent mark cues. If you remove the Mark on 178 it will work fine.
Reply
  • 0
    [QUOTE=c_muenchow;59717]Kevin,

    I am not seeing the mark issue. Can you post what your cue structure is or send us your show file so we can see what you are seeing?

    Hi Chris, I sent you a copy of the show file, I did a lot of work around programming so I had to recreate a specific issue.

    If you run Cuelist 498 on page 19. Run cue 176, Look at Studio Spot 250's. They will be in aqua-50 when cue 177 completes. Then if you fire cue 178 they will revert to just aqua and lose the split color. It seems to be an issue in subsequent mark cues. If you remove the Mark on 178 it will work fine.
Children
No Data
Related

www.etcconnect.com