• State Not Answered
  • Date
    colin wood
  • Date
  • Replies 1 reply
  • Subscribers 5 subscribers
  • Views 394 views
  • Users 0 members are here

Patching to a 16bit dimmer?

Hello,

I'm after a little help with patching please.

How do I patch a 16bit dimmer? The stock dimmer seems to be just 8bit and I don't see how to build my own 16bit dimmer personality as the builder forces me to assign 0>255 to both channels and will not allow the 0>65535 option to be used.

A bit of advice would be most welcome.

Thanks in advance.

Colin
Parents
  • 0
    Well I jumped the gun slightly posting on here.

    Found out what I was doing wrong with the fixture builder and have now resolved my own issue.

    I just wasn't linking the two channels with the 1/2 command in the first column. As soon as I did that then the 0>65535 option was accepted.

    If anyone else ever has a similar issue, this is the link that helped me.

    www.dry-hire.at/beschreibungen/High_End_Systems/Wog/Wholehog3FixtureBuilderGuide.pdf

    Cheers

    Colin
Reply
  • 0
    Well I jumped the gun slightly posting on here.

    Found out what I was doing wrong with the fixture builder and have now resolved my own issue.

    I just wasn't linking the two channels with the 1/2 command in the first column. As soon as I did that then the 0>65535 option was accepted.

    If anyone else ever has a similar issue, this is the link that helped me.

    www.dry-hire.at/beschreibungen/High_End_Systems/Wog/Wholehog3FixtureBuilderGuide.pdf

    Cheers

    Colin
Children
No Data
Related

www.etcconnect.com