• State Not Answered
  • Date
    bhorowitz
  • Date
  • Replies 11 replies
  • Subscribers 5 subscribers
  • Views 897 views
  • Users 0 members are here

DMX output disconnected?

Running a full boar with full boar wing. Outputs of wing are fine. No DMX out of any of the 4 DMX outputs on the console.

Went to Network/widget outputs. Outputs 1-4 on console show..(Disconnected). Is this a setting somewhere or a hardware issue? I'm in Doha, Qatar for a day, then Budapest.

Had major issues earlier in the day with interface into ShowNet. Ended up running hard lines and then wing outputs worked, but not console.

I'll fire up my backup IPC tomorrow to see if it works, but am starting a 2 month international tour and would love to remedy this.

I'm attaching a photo of the screen.
Parents
  • 0
    Internal widget is not shown in the control panel.

    Haven't had time to open up the console. Maybe next gig.

    It wasn't HogNet, it was ShowNet(Strand). The Shownet boxes were showing that they were getting DMX, but it would not drive anything. Same cable plugged to a GrandMA was fine.

    I just hate going through the motions of restoring software and backing everything up if it's a hardware issue. Console was fine 2 days before, but there was airfreight in between.
Reply
  • 0
    Internal widget is not shown in the control panel.

    Haven't had time to open up the console. Maybe next gig.

    It wasn't HogNet, it was ShowNet(Strand). The Shownet boxes were showing that they were getting DMX, but it would not drive anything. Same cable plugged to a GrandMA was fine.

    I just hate going through the motions of restoring software and backing everything up if it's a hardware issue. Console was fine 2 days before, but there was airfreight in between.
Children
No Data
Related

www.etcconnect.com