Midi & Road Hog

Dear Hog World...

Currently setup in a theatre club we want to get the show control machine to activate the show cue sequence.

Show control is Ableton, for testing purposes I have downloaded a keyboard program that can output Midi at the stroke of a virtual keyboard.

The device to used on the road hog is the M-Audio Midisport Uno.

We have searched through the forums for instructions and tried many setup sequences.

We can see the Midi lights flashing on the M-Audio device, however we cannot see if the console is receiving or being activated.

Setup notes:
- Midi Note Mapping is Active
- Midi Note mapping is setup similar to these settings (housetohalf.net/Housetohalf/iPhone.html)
- Timecode has been selected to receive midi
- Cue list Options - I/O settings shows only timecode source as 1:Console

Our questions:
- Is there something specific that tells the console to start timecode or trigger a cue list
- is there an icon somewhere that shows that the console is receiving the midi signal

If you can help, this would be ideal.

Regards,

Ryan
Parents
  • 0
    Thanks for this, we followed these steps before.
    Unfortunately we are not seeing any triggering on the console.
    The device is receiving midi in, we can see this as the led indicator flashes every time we transmit midi.

    Any thoughts??

    Would it be better to assign midi keys to trigger time code?

    [QUOTE=MLorenz;67612]Setup-> Control Panel:
    Select your Mididevice

    Setup -> Network:
    Select your Console
    There is Tab Midi Note Mapping, here you can configure the midinotes to your needs, like trigger comment macros, playback control and so
    In the Manual which you can also find in the console go to section 28.3
Reply
  • 0
    Thanks for this, we followed these steps before.
    Unfortunately we are not seeing any triggering on the console.
    The device is receiving midi in, we can see this as the led indicator flashes every time we transmit midi.

    Any thoughts??

    Would it be better to assign midi keys to trigger time code?

    [QUOTE=MLorenz;67612]Setup-> Control Panel:
    Select your Mididevice

    Setup -> Network:
    Select your Console
    There is Tab Midi Note Mapping, here you can configure the midinotes to your needs, like trigger comment macros, playback control and so
    In the Manual which you can also find in the console go to section 28.3
Children
No Data
Related

www.etcconnect.com