Wholehog 3 & USB DMX?

I have a Wholehog 3. Updated it to 3.2.6, and loaded the scenes from my ailing Roadhog. I picked up one of the black HOG DMX USB nodes so it can talk to my lights. Hog3PC sees it and operates. Wholehog desk does not. The Setup/Network window says DMX Processor Processor not found, unlike Hog3PC which says found. Am I doing something wrong, or does the Wholehog 3 not support USB widgets?

Parents
  • To my knowledge Whole Hog 3 has no onboard processing ability. You will need an external DP8000 to get output

  • Doesn't the USB DMX widget do that? That's all Hog3PC from the same era needs.

  • The USB dmx widget has no processing power it's just an extra port for a processor to get physical DMX out of, like if you needed a DMX cable for universe 9 instead of ethernet

  • So they put a virtual DP8000 in Hog3PC for free, but not in what I'm guessing was their top of the line console at the time? wtf. Is this documented someplace I should have found it? Would a DP2000 work?

  • I believe when it was launched it shipped with an external DP2000 processor. I am pretty sure 3.2.0 was the last version that supported the DP2000, if you are running a later version it would require a DP8000

  • Disappointing, but thank you. Time to leave the hog world behind.

Reply Children
No Data