• Date
    markwyse24
  • Date
  • Replies 1 reply
  • Subscribers 67 subscribers
  • Views 4200 views
  • Users 0 members are here

Recall Memories with timing via bumps

Hello,

 I'd like ability to recall a memory with timing via the memories' bump button.  Is this possible?  I know you can do this when you are in recording mode for a cue stack...the console previews the look and fade time while you record.  I'm wondering if this could be an optional operating mode?  My users are very non-technical and I'd like to setup a page of memories with looks that they can transition to just by pressing the bump button.  Building a cue stack wouldn't work well because we often don't follow a set order.

I guess I could just operate the board in cue stack recording mode but it would be great if there was a better way and if the buttons didn't flash. 

 Thanks for your time,

Mark Wyse

Blackhawk Church, Madison, WI
 

Parents

  • From the cheap seats looking in: would enabling "NEXT" for the memories work for your application?  Seems (again from the cheap seats) that this would be easier to implement for ETC than adding a completely new feature. 

    Best,

    John Penisten
    Full Compass Systems
    Rental, Production, Design
    http://www.fullcompass.com
    Phone: 800-356-5844 Ext. 1355
    Fax: 608-831-6330

    "There is nothing either good or bad, but thinking makes it so." - William Shakespeare 

Reply

  • From the cheap seats looking in: would enabling "NEXT" for the memories work for your application?  Seems (again from the cheap seats) that this would be easier to implement for ETC than adding a completely new feature. 

    Best,

    John Penisten
    Full Compass Systems
    Rental, Production, Design
    http://www.fullcompass.com
    Phone: 800-356-5844 Ext. 1355
    Fax: 608-831-6330

    "There is nothing either good or bad, but thinking makes it so." - William Shakespeare 

Children
No Data
Related

www.etcconnect.com