Is proportional patching possible on the SmartFade or SmartFade ML?
Any possibility of it in the future?
Is proportional patching possible on the SmartFade or SmartFade ML?
Any possibility of it in the future?
As I suspected, we do not have proportional patching on the list for SmartFade/SmartFade ML console features. We have a nice selection of other consoles that do offer proportional patching, though. Could I interest you in one of those? :-)
Thanks -
Sarah
You certainly could! Unfortunately, as a dealer, we just can't buy everything!
The reason I ask, just so you know, is that I hooked up an Apollo Right Arm with a Source Four and scroller for a demo; but even setting the Right Arm mode to a small pan/tilt range, the back of the fixture still hits the Right Arm when the tilt attribute goes above 65%.
So, it has absolutely nothing to do with dimming, just a specific fixture. I plan on talking to Apollo about greater control over setting pan and tilt limits.
Thanks for checking!
David
You certainly could! Unfortunately, as a dealer, we just can't buy everything!
The reason I ask, just so you know, is that I hooked up an Apollo Right Arm with a Source Four and scroller for a demo; but even setting the Right Arm mode to a small pan/tilt range, the back of the fixture still hits the Right Arm when the tilt attribute goes above 65%.
So, it has absolutely nothing to do with dimming, just a specific fixture. I plan on talking to Apollo about greater control over setting pan and tilt limits.
Thanks for checking!
David
www.etcconnect.com