I just started using smartfade lighting console recently and discovered that apart from working with what's already in the memory, the faders don't functions.
Please, any way to enable the IntA, InB and other devices back?
If the console isn't in Playback Only mode, I'd suggest pressing the Next button as the Smartfade may be in blind mode. The LED under the button can burn out. When that happens, there's no indication what mode the Smartfade is in.
If the console isn't in Playback Only mode, I'd suggest pressing the Next button as the Smartfade may be in blind mode. The LED under the button can burn out. When that happens, there's no indication what mode the Smartfade is in.
SmartSoft should not have any control if you disconnect the computer running it from the console. If you have full control when you take away the SmartSoft computer this should be a clue that you are being over ridden. Are you saying that there are two of you trying to program the console simultaneously? One from a computer with SmartSoft and the other directly from the desk of the Smartfade? As far as I know there is no way to prioritize which will win. Just unplug the computer and the console will stand alone. You may have to start over from initial set-up to get the console to do what YOU want but you should be clear of anyone else over-riding your programming.
