SMARTFADE 1248 channel faders unresponsive

Are the AB Faders down or up? Try changing their Position.

They are down. I tried using the faders with the AB Faders in both positions with no result.

can you take a photo of the console and post here so we can see what functions are all active and what Colors the Buttons are?

can you take a photo of the console and post here so we can see what functions are all active and what Colors the Buttons are?

here Corey, hope this helps:

Thanks for the photos - does look like everything is working.

And you say that when you use the Memory Faders, lights react out of dmx and on the Display? Just not the intensity faders?

 

Something seems very odd. There is the possibilty to set the console back to Factory Settings Clearing the Show out of the Memory

though. Could you save your Show to SD Card if its important, and then follow instructions from my PM to reset console Clearing all Settings and

Show?

 

 

I would also suggest that you could be in "NEXT" mode without knowing it. That would cause many of the symptoms you have.

You could go to the Self-Test menu and verify if the blue LED behind "NEXT" is burned out.

www.etcconnect.com/.../Deep-Clear-And-Self-Tests-On-SmartFade-Consoles.aspx

If so, please speak with your local Technical Services about getting it fixed.