• Date
    DaveW
  • Date
  • Replies 3 replies
  • Subscribers 67 subscribers
  • Views 4604 views
  • Users 0 members are here

Problems with Software update using both SD and USB methods

I'm trying to update the fixture personalities website to make some of our LEDs work better.  However, I'm not able to get the Smartfade ML to go into software update mode.  I've held down the "Solo" and "Undo" buttons while starting up with no results.

Any help would be appreciated.

Thanks, Dave

Parents

  • Dave,

    To update your SFML fixture library you do not need to put the console into update firmware mode. With the console in normal operating mode, you can load the updated library through patch devices in the Patch menu:

    Menu>Patch>Patch Devices>[Load Personalities]

    The file needs to be unzipped then loaded onto an SD card. After unzipping the file should be called "perslib.bin"; it needs to keep this file name to be loaded properly into the SFML

    This is discussed in more detail on page 7 of the SFML manual. Which you can download here, link:

    http://www.etcconnect.com/product.downloads.aspx?ID=20338

Reply

  • Dave,

    To update your SFML fixture library you do not need to put the console into update firmware mode. With the console in normal operating mode, you can load the updated library through patch devices in the Patch menu:

    Menu>Patch>Patch Devices>[Load Personalities]

    The file needs to be unzipped then loaded onto an SD card. After unzipping the file should be called "perslib.bin"; it needs to keep this file name to be loaded properly into the SFML

    This is discussed in more detail on page 7 of the SFML manual. Which you can download here, link:

    http://www.etcconnect.com/product.downloads.aspx?ID=20338

Children
Related

www.etcconnect.com