Problems finding or creating profile for 6 dmx channel LED

Hi Dave,

It certainly is possible to create a custom fixture personality that meets your needs-- take a peek at the user manual (http://www.etcconnect.com/docs/docs_downloads/manuals/SmartFadeML_v3.0_User_Manual_revA.pdf) here.  Beginning with page 32, it addresses the basics of creating a custom fixture.  Especially in your case, I'd recommend creating this fixture live, as it will give you instant feedback on if it's being addressed properly.  Since this is an RGB fixture, you'll want to pay special attention to the section at the top of page 34.  

As always, please ask more questions if you run into problems.   

Hans

Hi Dave,

It certainly is possible to create a custom fixture personality that meets your needs-- take a peek at the user manual (http://www.etcconnect.com/docs/docs_downloads/manuals/SmartFadeML_v3.0_User_Manual_revA.pdf) here.  Beginning with page 32, it addresses the basics of creating a custom fixture.  Especially in your case, I'd recommend creating this fixture live, as it will give you instant feedback on if it's being addressed properly.  Since this is an RGB fixture, you'll want to pay special attention to the section at the top of page 34.  

As always, please ask more questions if you run into problems.   

Hans

Thanks.  I'll be trying that tomorrow or Friday.  Dave