• Date
    Cleric101
  • Date
  • Replies 2 replies
  • Subscribers 67 subscribers
  • Views 4236 views
  • Users 0 members are here

Smart Fade Personality not found for Silver Star on new Fixture Library v6.6.5

Hope there is someone who can help me out.....

We have just bought an ETC Smart Fade ML, for an installation (which is now complete except for desk) in a new TV Studio.

I was going through the list of fixtures it has in the Fixture Library Contents List, and found that it did not have a few of the fixtures which we have installed.

Silver Star is not even part of the new Firmware Library which I updated to...(v3.0.0)

We have installed a number of Silver Star MXPRIMEs (LED moving head 16/12 chnls), and the Silver Star BOXER LEDs (11/6 chnls, RGBW)

I was wondering if there is a personality for this fixtures some where out there...?

If personalities need to be built, I can send the Channel lists.

 

I feel rather stupid cause I cant seem to get the User Defined Personality Patch to work...

 

I did send an email to uk@etcconnect.com, on the 2011/03/11, but haven't had a reply.

Parents

  • Do you already have a copy of the manual? If not, here are the SmartFade ML downloads - direct link to the PDF)

    The custom user personality instructions and some worked examples are on pages 32-37.

    A quick summary, to create a custom personality:

    Use the left-hand dial to choose the appropriate DMX offset, the middle dial to choose the Home value 0-255, and press the fader bump button for the parameter it should be.
    - Pan and Tilt 16-bit parameter faders have Coarse and Fine. For these, hit the button again to cycle through the options.

    Two of your fixtures are RGB colour mixing mode. Hit [More] to switch between the modes and select RGB, and the Hue/Sat parameter buttons to assign each of Red, Green and Blue.

    The third one that's got an Amber should use the "RGBA" mode, and Amber goes on Fader 6



    [edited by: Richard at 6:45 AM (GMT -6) on Wed, Mar 23 2011]
Reply

  • Do you already have a copy of the manual? If not, here are the SmartFade ML downloads - direct link to the PDF)

    The custom user personality instructions and some worked examples are on pages 32-37.

    A quick summary, to create a custom personality:

    Use the left-hand dial to choose the appropriate DMX offset, the middle dial to choose the Home value 0-255, and press the fader bump button for the parameter it should be.
    - Pan and Tilt 16-bit parameter faders have Coarse and Fine. For these, hit the button again to cycle through the options.

    Two of your fixtures are RGB colour mixing mode. Hit [More] to switch between the modes and select RGB, and the Hue/Sat parameter buttons to assign each of Red, Green and Blue.

    The third one that's got an Amber should use the "RGBA" mode, and Amber goes on Fader 6



    [edited by: Richard at 6:45 AM (GMT -6) on Wed, Mar 23 2011]
Children
No Data
Related

www.etcconnect.com