Personality Editor Problem?

Hi,

Sorry for the late reply.

It sounds like there might be a problem with fader 5. If the value read from fader the isn't stable you would see something like what you describe.

Does fader 5 work properly in other situations? If you move fade 5 to full, does it make it work better? 

Fader 5 seems to be working properly in all functions except in tne personality editor. I can run 5 to full in the editor mode and get signal output but I cannot assign values to any faders because offset keeps going back to fader 5. I am not familiar with this console or building a profile so I really can't explain what is happening.

Hello Mr. rdson418,

Have you tried to create the personality without using the faders but only the encoders and the display? I have a similar problem by editing new personalities using the faders. It seems like the values on some fader controls change automatically..... I solved the problem using the encoders and the values indicated on the display, without touching the faders. It took several attempts but finally it works.

I hope I was helpul. Bye and good luck.

nczk

Hello Mr. rdson418,

Have you tried to create the personality without using the faders but only the encoders and the display? I have a similar problem by editing new personalities using the faders. It seems like the values on some fader controls change automatically..... I solved the problem using the encoders and the values indicated on the display, without touching the faders. It took several attempts but finally it works.

I hope I was helpul. Bye and good luck.

nczk