Using an Arduino Micro (Genuino) with #lighthack with Nomad & WIN10

Hi all,

I'm trying to get the usb_test sketch to work on a Genuino Micro (ATMEAGA32U4) but I'm not having any luck. The sketch works perfectly on my Arduino Uno.

Both devices show up in device manager as expected:

With the UNO in EOS Nomad's Diagnostics tab with Incoming OSC turned on I get the following:

However when I do the same with my Micro I only get this:

Which to me looks like Nomad isn't recognizing it as a USB com port or a OSC USB device. However if I press the reset button (instead of plugging in the USB on the Micro), I get the following output:

The code I'm using is the same on both Arduinos and has been copied directly from Github. I believe another user has reported that it works fine on a Micro clone, so is there possibly something different hardware wise? Or is there a code change I need to make to get it working?

EDIT: I read the TS Guide for #lighthack and at the end it made mention of the status of the LEDs on the Uno, should I be seeing the same on the Micro? Or is it different because it's got a built in USB and therefore not using the same Tx and Rx LEDs? Because aside from the power LED, none are lit at all.

Any help would be greatly appreciated,

Cheers,

Kieran

Parents Reply Children
  • I had both devices connected for that screenshot showing they're both detected. But I only had one connected when using Nomad
  • Tried to use a original Leonardo ETH also with the same micro controller like the micro and have the same problem.
    The cheap clone works, the original not.
  • Maybe that Arduino's from arduino.org doesn't work. https://forum.arduino.cc/index.php?topic=307162.0 There are different USB VIDs.

    Arduino VID 2341

    Genuino VID 2A03

    You can get the board information in the Arduino IDE.

  • I changed the VID and PID in the boards text, no it work for LeonardoETH. Try this changed boards.txt file inside the Arduino IDE.

    # See: http://code.google.com/p/arduino/wiki/Platforms
    
    menu.cpu=Processor
    
    ##############################################################
    
    yun.name=Arduino Yún
    yun.upload.via_ssh=true
    
    yun.vid.0=0x2341
    yun.pid.0=0x0041
    yun.vid.1=0x2341
    yun.pid.1=0x8041
    yun.vid.2=0x2A03
    yun.pid.2=0x0041
    yun.vid.3=0x2A03
    yun.pid.3=0x8041
    
    yun.upload.tool=avrdude
    yun.upload.protocol=avr109
    yun.upload.maximum_size=28672
    yun.upload.maximum_data_size=2560
    yun.upload.speed=57600
    yun.upload.disable_flushing=true
    yun.upload.use_1200bps_touch=true
    yun.upload.wait_for_upload_port=true
    
    yun.bootloader.tool=avrdude
    yun.bootloader.low_fuses=0xff
    yun.bootloader.high_fuses=0xd8
    yun.bootloader.extended_fuses=0xfb
    yun.bootloader.file=caterina/Caterina-Yun.hex
    yun.bootloader.noblink=caterina/Caterina-Yun-noblink.hex
    yun.bootloader.unlock_bits=0x3F
    yun.bootloader.lock_bits=0x2F
    
    yun.build.mcu=atmega32u4
    yun.build.f_cpu=16000000L
    yun.build.vid=0x2341
    yun.build.pid=0x8041
    yun.build.usb_product="Arduino Yun"
    yun.build.board=AVR_YUN
    yun.build.core=arduino
    yun.build.variant=yun
    yun.build.extra_flags={build.usb_flags}
    
    ##############################################################
    
    uno.name=Arduino/Genuino Uno
    
    uno.vid.0=0x2341
    uno.pid.0=0x0043
    uno.vid.1=0x2341
    uno.pid.1=0x0001
    uno.vid.2=0x2A03
    uno.pid.2=0x0043
    uno.vid.3=0x2341
    uno.pid.3=0x0243
    
    uno.upload.tool=avrdude
    uno.upload.protocol=arduino
    uno.upload.maximum_size=32256
    uno.upload.maximum_data_size=2048
    uno.upload.speed=115200
    
    uno.bootloader.tool=avrdude
    uno.bootloader.low_fuses=0xFF
    uno.bootloader.high_fuses=0xDE
    uno.bootloader.extended_fuses=0xFD
    uno.bootloader.unlock_bits=0x3F
    uno.bootloader.lock_bits=0x0F
    uno.bootloader.file=optiboot/optiboot_atmega328.hex
    
    uno.build.mcu=atmega328p
    uno.build.f_cpu=16000000L
    uno.build.board=AVR_UNO
    uno.build.core=arduino
    uno.build.variant=standard
    
    ##############################################################
    
    diecimila.name=Arduino Duemilanove or Diecimila
    
    diecimila.upload.tool=avrdude
    diecimila.upload.protocol=arduino
    
    diecimila.bootloader.tool=avrdude
    diecimila.bootloader.low_fuses=0xFF
    diecimila.bootloader.unlock_bits=0x3F
    diecimila.bootloader.lock_bits=0x0F
    
    diecimila.build.f_cpu=16000000L
    diecimila.build.board=AVR_DUEMILANOVE
    diecimila.build.core=arduino
    diecimila.build.variant=standard
    
    ## Arduino Duemilanove or Diecimila w/ ATmega328P
    ## ----------------------------------------------
    diecimila.menu.cpu.atmega328=ATmega328P
    
    diecimila.menu.cpu.atmega328.upload.maximum_size=30720
    diecimila.menu.cpu.atmega328.upload.maximum_data_size=2048
    diecimila.menu.cpu.atmega328.upload.speed=57600
    
    diecimila.menu.cpu.atmega328.bootloader.high_fuses=0xDA
    diecimila.menu.cpu.atmega328.bootloader.extended_fuses=0xFD
    diecimila.menu.cpu.atmega328.bootloader.file=atmega/ATmegaBOOT_168_atmega328.hex
    
    diecimila.menu.cpu.atmega328.build.mcu=atmega328p
    
    ## Arduino Duemilanove or Diecimila w/ ATmega168
    ## ---------------------------------------------
    diecimila.menu.cpu.atmega168=ATmega168
    
    diecimila.menu.cpu.atmega168.upload.maximum_size=14336
    diecimila.menu.cpu.atmega168.upload.maximum_data_size=1024
    diecimila.menu.cpu.atmega168.upload.speed=19200
    
    diecimila.menu.cpu.atmega168.bootloader.high_fuses=0xdd
    diecimila.menu.cpu.atmega168.bootloader.extended_fuses=0xF8
    diecimila.menu.cpu.atmega168.bootloader.file=atmega/ATmegaBOOT_168_diecimila.hex
    
    diecimila.menu.cpu.atmega168.build.mcu=atmega168
    
    ##############################################################
    
    nano.name=Arduino Nano
    
    nano.upload.tool=avrdude
    nano.upload.protocol=arduino
    
    nano.bootloader.tool=avrdude
    nano.bootloader.unlock_bits=0x3F
    nano.bootloader.lock_bits=0x0F
    
    nano.build.f_cpu=16000000L
    nano.build.board=AVR_NANO
    nano.build.core=arduino
    nano.build.variant=eightanaloginputs
    
    ## Arduino Nano w/ ATmega328P
    ## --------------------------
    nano.menu.cpu.atmega328=ATmega328P
    
    nano.menu.cpu.atmega328.upload.maximum_size=30720
    nano.menu.cpu.atmega328.upload.maximum_data_size=2048
    nano.menu.cpu.atmega328.upload.speed=57600
    
    nano.menu.cpu.atmega328.bootloader.low_fuses=0xFF
    nano.menu.cpu.atmega328.bootloader.high_fuses=0xDA
    nano.menu.cpu.atmega328.bootloader.extended_fuses=0xFD
    nano.menu.cpu.atmega328.bootloader.file=atmega/ATmegaBOOT_168_atmega328.hex
    
    nano.menu.cpu.atmega328.build.mcu=atmega328p
    
    ## Arduino Nano w/ ATmega168
    ## -------------------------
    nano.menu.cpu.atmega168=ATmega168
    
    nano.menu.cpu.atmega168.upload.maximum_size=14336
    nano.menu.cpu.atmega168.upload.maximum_data_size=1024
    nano.menu.cpu.atmega168.upload.speed=19200
    
    nano.menu.cpu.atmega168.bootloader.low_fuses=0xff
    nano.menu.cpu.atmega168.bootloader.high_fuses=0xdd
    nano.menu.cpu.atmega168.bootloader.extended_fuses=0xF8
    nano.menu.cpu.atmega168.bootloader.file=atmega/ATmegaBOOT_168_diecimila.hex
    
    nano.menu.cpu.atmega168.build.mcu=atmega168
    
    ##############################################################
    
    mega.name=Arduino/Genuino Mega or Mega 2560
    
    mega.vid.0=0x2341
    mega.pid.0=0x0010
    mega.vid.1=0x2341
    mega.pid.1=0x0042
    mega.vid.2=0x2A03
    mega.pid.2=0x0010
    mega.vid.3=0x2A03
    mega.pid.3=0x0042
    mega.vid.4=0x2341
    mega.pid.4=0x0210
    mega.vid.5=0x2341
    mega.pid.5=0x0242
    
    mega.upload.tool=avrdude
    mega.upload.maximum_data_size=8192
    
    mega.bootloader.tool=avrdude
    mega.bootloader.low_fuses=0xFF
    mega.bootloader.unlock_bits=0x3F
    mega.bootloader.lock_bits=0x0F
    
    mega.build.f_cpu=16000000L
    mega.build.core=arduino
    mega.build.variant=mega
    # default board may be overridden by the cpu menu
    mega.build.board=AVR_MEGA2560
    
    ## Arduino/Genuino Mega w/ ATmega2560
    ## -------------------------
    mega.menu.cpu.atmega2560=ATmega2560 (Mega 2560)
    
    mega.menu.cpu.atmega2560.upload.protocol=wiring
    mega.menu.cpu.atmega2560.upload.maximum_size=253952
    mega.menu.cpu.atmega2560.upload.speed=115200
    
    mega.menu.cpu.atmega2560.bootloader.high_fuses=0xD8
    mega.menu.cpu.atmega2560.bootloader.extended_fuses=0xFD
    mega.menu.cpu.atmega2560.bootloader.file=stk500v2/stk500boot_v2_mega2560.hex
    
    mega.menu.cpu.atmega2560.build.mcu=atmega2560
    mega.menu.cpu.atmega2560.build.board=AVR_MEGA2560
    
    ## Arduino Mega w/ ATmega1280
    ## -------------------------
    mega.menu.cpu.atmega1280=ATmega1280
    
    mega.menu.cpu.atmega1280.upload.protocol=arduino
    mega.menu.cpu.atmega1280.upload.maximum_size=126976
    mega.menu.cpu.atmega1280.upload.speed=57600
    
    mega.menu.cpu.atmega1280.bootloader.high_fuses=0xDA
    mega.menu.cpu.atmega1280.bootloader.extended_fuses=0xF5
    mega.menu.cpu.atmega1280.bootloader.file=atmega/ATmegaBOOT_168_atmega1280.hex
    
    mega.menu.cpu.atmega1280.build.mcu=atmega1280
    mega.menu.cpu.atmega1280.build.board=AVR_MEGA
    
    ##############################################################
    
    megaADK.name=Arduino Mega ADK
    
    megaADK.vid.0=0x2341
    megaADK.pid.0=0x003f
    megaADK.vid.1=0x2341
    megaADK.pid.1=0x0044
    megaADK.vid.2=0x2A03
    megaADK.pid.2=0x003f
    megaADK.vid.3=0x2A03
    megaADK.pid.3=0x0044
    
    megaADK.upload.tool=avrdude
    megaADK.upload.protocol=wiring
    megaADK.upload.maximum_size=253952
    megaADK.upload.maximum_data_size=8192
    megaADK.upload.speed=115200
    
    megaADK.bootloader.tool=avrdude
    megaADK.bootloader.low_fuses=0xFF
    megaADK.bootloader.high_fuses=0xD8
    megaADK.bootloader.extended_fuses=0xFD
    megaADK.bootloader.file=stk500v2/stk500boot_v2_mega2560.hex
    megaADK.bootloader.unlock_bits=0x3F
    megaADK.bootloader.lock_bits=0x0F
    
    megaADK.build.mcu=atmega2560
    megaADK.build.f_cpu=16000000L
    megaADK.build.board=AVR_ADK
    megaADK.build.core=arduino
    megaADK.build.variant=mega
    
    ##############################################################
    
    leonardo.name=Arduino Leonardo
    leonardo.vid.0=0x2341
    leonardo.pid.0=0x0036
    leonardo.vid.1=0x2341
    leonardo.pid.1=0x0036
    leonardo.vid.2=0x2341
    leonardo.pid.2=0x0036
    leonardo.vid.3=0x2341
    leonardo.pid.3=0x0036
    
    leonardo.upload.tool=avrdude
    leonardo.upload.protocol=avr109
    leonardo.upload.maximum_size=28672
    leonardo.upload.maximum_data_size=2560
    leonardo.upload.speed=57600
    leonardo.upload.disable_flushing=true
    leonardo.upload.use_1200bps_touch=true
    leonardo.upload.wait_for_upload_port=true
    
    leonardo.bootloader.tool=avrdude
    leonardo.bootloader.low_fuses=0xff
    leonardo.bootloader.high_fuses=0xd8
    leonardo.bootloader.extended_fuses=0xcb
    leonardo.bootloader.file=caterina/Caterina-Leonardo.hex
    leonardo.bootloader.unlock_bits=0x3F
    leonardo.bootloader.lock_bits=0x2F
    
    leonardo.build.mcu=atmega32u4
    leonardo.build.f_cpu=16000000L
    leonardo.build.vid=0x2341
    leonardo.build.pid=0x0036
    leonardo.build.usb_product="Arduino Leonardo"
    leonardo.build.board=AVR_LEONARDO
    leonardo.build.core=arduino
    leonardo.build.variant=leonardo
    leonardo.build.extra_flags={build.usb_flags}
    
    ##############################################################
    
    leonardoeth.name=Arduino Leonardo ETH
    leonardoeth.vid.0=0x2341
    leonardoeth.pid.0=0x0036
    leonardoeth.vid.1=0x2341
    leonardoeth.pid.1=0x0036
    
    leonardoeth.upload.tool=avrdude
    leonardoeth.upload.protocol=avr109
    leonardoeth.upload.maximum_size=28672
    leonardoeth.upload.maximum_data_size=2560
    leonardoeth.upload.speed=57600
    leonardoeth.upload.disable_flushing=true
    leonardoeth.upload.use_1200bps_touch=true
    leonardoeth.upload.wait_for_upload_port=true
    
    leonardoeth.bootloader.tool=avrdude
    leonardoeth.bootloader.low_fuses=0xff
    leonardoeth.bootloader.high_fuses=0xd8
    leonardoeth.bootloader.extended_fuses=0xcb
    leonardoeth.bootloader.file=caterina/Caterina-LeonardoEthernet.hex
    leonardoeth.bootloader.unlock_bits=0x3F
    leonardoeth.bootloader.lock_bits=0x2F
    
    leonardoeth.build.mcu=atmega32u4
    leonardoeth.build.f_cpu=16000000L
    leonardoeth.build.vid=0x2341
    leonardoeth.build.pid=0x0036
    leonardoeth.build.usb_product="Arduino Leonardo ETH"
    leonardoeth.build.board=AVR_LEONARDO_ETH
    leonardoeth.build.core=arduino
    leonardoeth.build.variant=leonardo
    leonardoeth.build.extra_flags={build.usb_flags}
    
    ##############################################################
    
    micro.name=Arduino/Genuino Micro
    
    micro.vid.0=0x2341
    micro.pid.0=0x0037
    micro.vid.1=0x2341
    micro.pid.1=0x0037
    micro.vid.2=0x2341
    micro.pid.2=0x0037
    micro.vid.3=0x2341
    micro.pid.3=0x0037
    
    micro.vid.4=0x2341
    micro.pid.4=0x0037
    # If the board is a 2341:0237 use 2341:8237 for build and set
    # other parameters as well
    micro.vid.4.build.vid=0x2341
    micro.vid.4.build.pid=0x0037
    micro.vid.4.build.usb_product="Genuino Micro"
    micro.vid.4.bootloader.file=caterina/Caterina-Genuino-Micro.hex
    
    micro.vid.5=0x2341
    micro.pid.5=0x8237
    # If the board is a 2341:8237 use 2341:8237 for build and set
    # other paramters as well
    micro.vid.5.build.vid=0x2341
    micro.vid.5.build.pid=0x0037
    micro.vid.5.build.usb_product="Genuino Micro"
    micro.vid.5.bootloader.file=caterina/Caterina-Genuino-Micro.hex
    
    micro.upload.tool=avrdude
    micro.upload.protocol=avr109
    micro.upload.maximum_size=28672
    micro.upload.maximum_data_size=2560
    micro.upload.speed=57600
    micro.upload.disable_flushing=true
    micro.upload.use_1200bps_touch=true
    micro.upload.wait_for_upload_port=true
    
    micro.bootloader.tool=avrdude
    micro.bootloader.low_fuses=0xff
    micro.bootloader.high_fuses=0xd8
    micro.bootloader.extended_fuses=0xcb
    micro.bootloader.file=caterina/Caterina-Micro.hex
    micro.bootloader.unlock_bits=0x3F
    micro.bootloader.lock_bits=0x2F
    
    micro.build.mcu=atmega32u4
    micro.build.f_cpu=16000000L
    micro.build.vid=0x2341
    micro.build.pid=0x0037
    micro.build.usb_product="Arduino Micro"
    micro.build.board=AVR_MICRO
    micro.build.core=arduino
    micro.build.variant=micro
    micro.build.extra_flags={build.usb_flags}
    
    ##############################################################
    
    esplora.name=Arduino Esplora
    esplora.vid.0=0x2341
    esplora.pid.0=0x003C
    esplora.vid.1=0x2341
    esplora.pid.1=0x803C
    esplora.vid.2=0x2341
    esplora.pid.2=0x003C
    esplora.vid.3=0x2341
    esplora.pid.3=0x803C
    
    esplora.upload.tool=avrdude
    esplora.upload.protocol=avr109
    esplora.upload.maximum_size=28672
    esplora.upload.maximum_data_size=2560
    esplora.upload.speed=57600
    esplora.upload.disable_flushing=true
    esplora.upload.use_1200bps_touch=true
    esplora.upload.wait_for_upload_port=true
    
    esplora.bootloader.tool=avrdude
    esplora.bootloader.low_fuses=0xff
    esplora.bootloader.high_fuses=0xd8
    esplora.bootloader.extended_fuses=0xcb
    esplora.bootloader.file=caterina/Caterina-Esplora.hex
    esplora.bootloader.unlock_bits=0x3F
    esplora.bootloader.lock_bits=0x2F
    
    esplora.build.mcu=atmega32u4
    esplora.build.f_cpu=16000000L
    esplora.build.vid=0x2341
    esplora.build.pid=0x803c
    esplora.build.usb_product="Arduino Esplora"
    esplora.build.board=AVR_ESPLORA
    esplora.build.core=arduino
    esplora.build.variant=leonardo
    esplora.build.extra_flags={build.usb_flags}
    
    ##############################################################
    
    mini.name=Arduino Mini
    
    mini.upload.tool=avrdude
    mini.upload.protocol=arduino
    
    mini.bootloader.tool=avrdude
    mini.bootloader.low_fuses=0xff
    mini.bootloader.unlock_bits=0x3F
    mini.bootloader.lock_bits=0x0F
    
    mini.build.f_cpu=16000000L
    mini.build.board=AVR_MINI
    mini.build.core=arduino
    mini.build.variant=eightanaloginputs
    
    ## Arduino Mini w/ ATmega328P
    ## --------------------------
    mini.menu.cpu.atmega328=ATmega328P
    
    mini.menu.cpu.atmega328.upload.maximum_size=28672
    mini.menu.cpu.atmega328.upload.maximum_data_size=2048
    mini.menu.cpu.atmega328.upload.speed=115200
    
    mini.menu.cpu.atmega328.bootloader.high_fuses=0xd8
    mini.menu.cpu.atmega328.bootloader.extended_fuses=0xFD
    mini.menu.cpu.atmega328.bootloader.file=optiboot/optiboot_atmega328-Mini.hex
    
    mini.menu.cpu.atmega328.build.mcu=atmega328p
    
    ## Arduino Mini w/ ATmega168
    ## -------------------------
    mini.menu.cpu.atmega168=ATmega168
    
    mini.menu.cpu.atmega168.upload.maximum_size=14336
    mini.menu.cpu.atmega168.upload.maximum_data_size=1024
    mini.menu.cpu.atmega168.upload.speed=19200
    
    mini.menu.cpu.atmega168.bootloader.high_fuses=0xdd
    mini.menu.cpu.atmega168.bootloader.extended_fuses=0xF8
    mini.menu.cpu.atmega168.bootloader.file=atmega/ATmegaBOOT_168_ng.hex
    
    mini.menu.cpu.atmega168.build.mcu=atmega168
    
    ##############################################################
    
    ethernet.name=Arduino Ethernet
    
    ethernet.upload.tool=avrdude
    ethernet.upload.protocol=arduino
    ethernet.upload.maximum_size=32256
    ethernet.upload.maximum_data_size=2048
    ethernet.upload.speed=115200
    
    ethernet.bootloader.tool=avrdude
    ethernet.bootloader.low_fuses=0xff
    ethernet.bootloader.high_fuses=0xde
    ethernet.bootloader.extended_fuses=0xFD
    ethernet.bootloader.file=optiboot/optiboot_atmega328.hex
    ethernet.bootloader.unlock_bits=0x3F
    ethernet.bootloader.lock_bits=0x0F
    
    ethernet.build.variant=ethernet
    ethernet.build.mcu=atmega328p
    ethernet.build.f_cpu=16000000L
    ethernet.build.board=AVR_ETHERNET
    ethernet.build.core=arduino
    
    ##############################################################
    
    fio.name=Arduino Fio
    
    fio.upload.tool=avrdude
    fio.upload.protocol=arduino
    fio.upload.maximum_size=30720
    fio.upload.maximum_data_size=2048
    fio.upload.speed=57600
    
    fio.bootloader.tool=avrdude
    fio.bootloader.low_fuses=0xFF
    fio.bootloader.high_fuses=0xDA
    fio.bootloader.extended_fuses=0xFD
    fio.bootloader.file=atmega/ATmegaBOOT_168_atmega328_pro_8MHz.hex
    fio.bootloader.unlock_bits=0x3F
    fio.bootloader.lock_bits=0x0F
    
    fio.build.mcu=atmega328p
    fio.build.f_cpu=8000000L
    fio.build.board=AVR_FIO
    fio.build.core=arduino
    fio.build.variant=eightanaloginputs
    
    ##############################################################
    
    bt.name=Arduino BT
    
    bt.upload.tool=avrdude
    bt.upload.protocol=arduino
    bt.upload.speed=19200
    bt.upload.disable_flushing=true
    
    bt.bootloader.tool=avrdude
    bt.bootloader.low_fuses=0xff
    bt.bootloader.unlock_bits=0x3F
    bt.bootloader.lock_bits=0x0F
    
    bt.build.f_cpu=16000000L
    bt.build.board=AVR_BT
    bt.build.core=arduino
    bt.build.variant=eightanaloginputs
    
    ## Arduino BT w/ ATmega328P
    ## ------------------------
    bt.menu.cpu.atmega328=ATmega328P
    bt.menu.cpu.atmega328.upload.maximum_size=28672
    bt.menu.cpu.atmega328.upload.maximum_data_size=2048
    
    bt.menu.cpu.atmega328.bootloader.high_fuses=0xd8
    bt.menu.cpu.atmega328.bootloader.extended_fuses=0xFD
    bt.menu.cpu.atmega328.bootloader.file=bt/ATmegaBOOT_168_atmega328_bt.hex
    
    bt.menu.cpu.atmega328.build.mcu=atmega328p
    
    ## Arduino BT w/ ATmega168
    ## -----------------------
    bt.menu.cpu.atmega168=ATmega168
    bt.menu.cpu.atmega168.upload.maximum_size=14336
    bt.menu.cpu.atmega168.upload.maximum_data_size=1024
    
    bt.menu.cpu.atmega168.bootloader.high_fuses=0xdd
    bt.menu.cpu.atmega168.bootloader.extended_fuses=0xF8
    bt.menu.cpu.atmega168.bootloader.file=bt/ATmegaBOOT_168.hex
    
    bt.menu.cpu.atmega168.build.mcu=atmega168
    
    ##############################################################
    
    LilyPadUSB.name=LilyPad Arduino USB
    LilyPadUSB.vid.0=0x1B4F
    LilyPadUSB.pid.0=0x9207
    LilyPadUSB.vid.1=0x1B4F
    LilyPadUSB.pid.1=0x9208
    
    LilyPadUSB.upload.tool=avrdude
    LilyPadUSB.upload.protocol=avr109
    LilyPadUSB.upload.maximum_size=28672
    LilyPadUSB.upload.maximum_data_size=2560
    LilyPadUSB.upload.speed=57600
    LilyPadUSB.upload.disable_flushing=true
    LilyPadUSB.upload.use_1200bps_touch=true
    LilyPadUSB.upload.wait_for_upload_port=true
    
    LilyPadUSB.bootloader.tool=avrdude
    LilyPadUSB.bootloader.low_fuses=0xff
    LilyPadUSB.bootloader.high_fuses=0xd8
    LilyPadUSB.bootloader.extended_fuses=0xce
    LilyPadUSB.bootloader.file=caterina-LilyPadUSB/Caterina-LilyPadUSB.hex
    LilyPadUSB.bootloader.unlock_bits=0x3F
    LilyPadUSB.bootloader.lock_bits=0x2F
    
    LilyPadUSB.build.mcu=atmega32u4
    LilyPadUSB.build.f_cpu=8000000L
    LilyPadUSB.build.vid=0x1B4F
    LilyPadUSB.build.pid=0x9208
    LilyPadUSB.build.usb_product="LilyPad USB"
    LilyPadUSB.build.board=AVR_LILYPAD_USB
    LilyPadUSB.build.core=arduino
    LilyPadUSB.build.variant=leonardo
    LilyPadUSB.build.extra_flags={build.usb_flags}
    
    ##############################################################
    
    lilypad.name=LilyPad Arduino
    
    lilypad.upload.tool=avrdude
    lilypad.upload.protocol=arduino
    
    lilypad.bootloader.tool=avrdude
    lilypad.bootloader.unlock_bits=0x3F
    lilypad.bootloader.lock_bits=0x0F
    
    lilypad.build.f_cpu=8000000L
    lilypad.build.board=AVR_LILYPAD
    lilypad.build.core=arduino
    lilypad.build.variant=standard
    
    ## LilyPad Arduino w/ ATmega328P
    ## -----------------------------
    lilypad.menu.cpu.atmega328=ATmega328P
    
    lilypad.menu.cpu.atmega328.upload.maximum_size=30720
    lilypad.menu.cpu.atmega328.upload.maximum_data_size=2048
    lilypad.menu.cpu.atmega328.upload.speed=57600
    
    lilypad.menu.cpu.atmega328.bootloader.low_fuses=0xFF
    lilypad.menu.cpu.atmega328.bootloader.high_fuses=0xDA
    lilypad.menu.cpu.atmega328.bootloader.extended_fuses=0xFD
    lilypad.menu.cpu.atmega328.bootloader.file=atmega/ATmegaBOOT_168_atmega328_pro_8MHz.hex
    
    lilypad.menu.cpu.atmega328.build.mcu=atmega328p
    
    ## LilyPad Arduino w/ ATmega168
    ## ----------------------------
    lilypad.menu.cpu.atmega168=ATmega168
    
    lilypad.menu.cpu.atmega168.upload.maximum_size=14336
    lilypad.menu.cpu.atmega168.upload.maximum_data_size=1024
    lilypad.menu.cpu.atmega168.upload.speed=19200
    
    lilypad.menu.cpu.atmega168.bootloader.low_fuses=0xe2
    lilypad.menu.cpu.atmega168.bootloader.high_fuses=0xdd
    lilypad.menu.cpu.atmega168.bootloader.extended_fuses=0xF8
    lilypad.menu.cpu.atmega168.bootloader.file=lilypad/LilyPadBOOT_168.hex
    
    lilypad.menu.cpu.atmega168.build.mcu=atmega168
    
    ##############################################################
    
    pro.name=Arduino Pro or Pro Mini
    
    pro.upload.tool=avrdude
    pro.upload.protocol=arduino
    
    pro.bootloader.tool=avrdude
    pro.bootloader.unlock_bits=0x3F
    pro.bootloader.lock_bits=0x0F
    
    pro.build.board=AVR_PRO
    pro.build.core=arduino
    pro.build.variant=eightanaloginputs
    
    ## Arduino Pro or Pro Mini (5V, 16 MHz) w/ ATmega328P
    ## --------------------------------------------------
    pro.menu.cpu.16MHzatmega328=ATmega328P (5V, 16 MHz)
    
    pro.menu.cpu.16MHzatmega328.upload.maximum_size=30720
    pro.menu.cpu.16MHzatmega328.upload.maximum_data_size=2048
    pro.menu.cpu.16MHzatmega328.upload.speed=57600
    
    pro.menu.cpu.16MHzatmega328.bootloader.low_fuses=0xFF
    pro.menu.cpu.16MHzatmega328.bootloader.high_fuses=0xDA
    pro.menu.cpu.16MHzatmega328.bootloader.extended_fuses=0xFD
    pro.menu.cpu.16MHzatmega328.bootloader.file=atmega/ATmegaBOOT_168_atmega328.hex
    
    pro.menu.cpu.16MHzatmega328.build.mcu=atmega328p
    pro.menu.cpu.16MHzatmega328.build.f_cpu=16000000L
    
    ## Arduino Pro or Pro Mini (3.3V, 8 MHz) w/ ATmega328P
    ## ---------------------------------------------------
    pro.menu.cpu.8MHzatmega328=ATmega328P (3.3V, 8 MHz)
    
    pro.menu.cpu.8MHzatmega328.upload.maximum_size=30720
    pro.menu.cpu.8MHzatmega328.upload.maximum_data_size=2048
    pro.menu.cpu.8MHzatmega328.upload.speed=57600
    
    pro.menu.cpu.8MHzatmega328.bootloader.low_fuses=0xFF
    pro.menu.cpu.8MHzatmega328.bootloader.high_fuses=0xDA
    pro.menu.cpu.8MHzatmega328.bootloader.extended_fuses=0xFD
    pro.menu.cpu.8MHzatmega328.bootloader.file=atmega/ATmegaBOOT_168_atmega328_pro_8MHz.hex
    
    pro.menu.cpu.8MHzatmega328.build.mcu=atmega328p
    pro.menu.cpu.8MHzatmega328.build.f_cpu=8000000L
    
    ## Arduino Pro or Pro Mini (5V, 16 MHz) w/ ATmega168
    ## -------------------------------------------------
    pro.menu.cpu.16MHzatmega168=ATmega168 (5V, 16 MHz)
    
    pro.menu.cpu.16MHzatmega168.upload.maximum_size=14336
    pro.menu.cpu.16MHzatmega168.upload.maximum_data_size=1024
    pro.menu.cpu.16MHzatmega168.upload.speed=19200
    
    pro.menu.cpu.16MHzatmega168.bootloader.low_fuses=0xff
    pro.menu.cpu.16MHzatmega168.bootloader.high_fuses=0xdd
    pro.menu.cpu.16MHzatmega168.bootloader.extended_fuses=0xF8
    pro.menu.cpu.16MHzatmega168.bootloader.file=atmega/ATmegaBOOT_168_diecimila.hex
    
    pro.menu.cpu.16MHzatmega168.build.mcu=atmega168
    pro.menu.cpu.16MHzatmega168.build.f_cpu=16000000L
    
    ## Arduino Pro or Pro Mini (3.3V, 8 MHz) w/ ATmega168
    ## --------------------------------------------------
    pro.menu.cpu.8MHzatmega168=ATmega168 (3.3V, 8 MHz)
    
    pro.menu.cpu.8MHzatmega168.upload.maximum_size=14336
    pro.menu.cpu.8MHzatmega168.upload.maximum_data_size=1024
    pro.menu.cpu.8MHzatmega168.upload.speed=19200
    
    pro.menu.cpu.8MHzatmega168.bootloader.low_fuses=0xc6
    pro.menu.cpu.8MHzatmega168.bootloader.high_fuses=0xdd
    pro.menu.cpu.8MHzatmega168.bootloader.extended_fuses=0xF8
    pro.menu.cpu.8MHzatmega168.bootloader.file=atmega/ATmegaBOOT_168_pro_8MHz.hex
    
    pro.menu.cpu.8MHzatmega168.build.mcu=atmega168
    pro.menu.cpu.8MHzatmega168.build.f_cpu=8000000L
    
    ##############################################################
    
    atmegang.name=Arduino NG or older
    
    atmegang.upload.tool=avrdude
    atmegang.upload.protocol=arduino
    atmegang.upload.speed=19200
    
    atmegang.bootloader.tool=avrdude
    atmegang.bootloader.unlock_bits=0x3F
    atmegang.bootloader.lock_bits=0x0F
    
    atmegang.build.mcu=atmegang
    atmegang.build.f_cpu=16000000L
    atmegang.build.board=AVR_NG
    atmegang.build.core=arduino
    atmegang.build.variant=standard
    
    ## Arduino NG or older w/ ATmega168
    ## --------------------------------
    atmegang.menu.cpu.atmega168=ATmega168
    
    atmegang.menu.cpu.atmega168.upload.maximum_size=14336
    atmegang.menu.cpu.atmega168.upload.maximum_data_size=1024
    
    atmegang.menu.cpu.atmega168.bootloader.low_fuses=0xff
    atmegang.menu.cpu.atmega168.bootloader.high_fuses=0xdd
    atmegang.menu.cpu.atmega168.bootloader.extended_fuses=0xF8
    atmegang.menu.cpu.atmega168.bootloader.file=atmega/ATmegaBOOT_168_ng.hex
    
    atmegang.menu.cpu.atmega168.build.mcu=atmega168
    
    ## Arduino NG or older w/ ATmega8
    ## ------------------------------
    atmegang.menu.cpu.atmega8=ATmega8
    
    atmegang.menu.cpu.atmega8.upload.maximum_size=7168
    atmegang.menu.cpu.atmega8.upload.maximum_data_size=1024
    
    atmegang.menu.cpu.atmega8.bootloader.low_fuses=0xdf
    atmegang.menu.cpu.atmega8.bootloader.high_fuses=0xca
    atmegang.menu.cpu.atmega8.bootloader.extended_fuses=
    atmegang.menu.cpu.atmega8.bootloader.file=atmega8/ATmegaBOOT-prod-firmware-2009-11-07.hex
    
    atmegang.menu.cpu.atmega8.build.mcu=atmega8
    
    ##############################################################
    
    robotControl.name=Arduino Robot Control
    robotControl.vid.0=0x2341
    robotControl.pid.0=0x0038
    robotControl.vid.1=0x2341
    robotControl.pid.1=0x8038
    robotControl.vid.2=0x2A03
    robotControl.pid.2=0x0038
    robotControl.vid.3=0x2A03
    robotControl.pid.3=0x8038
    
    robotControl.upload.tool=avrdude
    robotControl.upload.protocol=avr109
    robotControl.upload.maximum_size=28672
    robotControl.upload.maximum_data_size=2560
    robotControl.upload.speed=57600
    robotControl.upload.disable_flushing=true
    robotControl.upload.use_1200bps_touch=true
    robotControl.upload.wait_for_upload_port=true
    
    robotControl.bootloader.tool=avrdude
    robotControl.bootloader.low_fuses=0xff
    robotControl.bootloader.high_fuses=0xd8
    robotControl.bootloader.extended_fuses=0xcb
    robotControl.bootloader.file=caterina-Arduino_Robot/Caterina-Robot-Control.hex
    robotControl.bootloader.unlock_bits=0x3F
    robotControl.bootloader.lock_bits=0x2F
    
    robotControl.build.mcu=atmega32u4
    robotControl.build.f_cpu=16000000L
    robotControl.build.vid=0x2341
    robotControl.build.pid=0x8038
    robotControl.build.usb_product="Robot Control"
    robotControl.build.board=AVR_ROBOT_CONTROL
    robotControl.build.core=arduino
    robotControl.build.variant=robot_control
    robotControl.build.extra_flags={build.usb_flags}
    
    ##############################################################
    
    robotMotor.name=Arduino Robot Motor
    robotMotor.vid.0=0x2341
    robotMotor.pid.0=0x0039
    robotMotor.vid.1=0x2341
    robotMotor.pid.1=0x8039
    robotMotor.vid.2=0x2A03
    robotMotor.pid.2=0x0039
    robotMotor.vid.3=0x2A03
    robotMotor.pid.3=0x8039
    
    robotMotor.upload.tool=avrdude
    robotMotor.upload.protocol=avr109
    robotMotor.upload.maximum_size=28672
    robotMotor.upload.maximum_data_size=2560
    robotMotor.upload.speed=57600
    robotMotor.upload.disable_flushing=true
    robotMotor.upload.use_1200bps_touch=true
    robotMotor.upload.wait_for_upload_port=true
    
    robotMotor.bootloader.tool=avrdude
    robotMotor.bootloader.low_fuses=0xff
    robotMotor.bootloader.high_fuses=0xd8
    robotMotor.bootloader.extended_fuses=0xcb
    robotMotor.bootloader.file=caterina-Arduino_Robot/Caterina-Robot-Motor.hex
    robotMotor.bootloader.unlock_bits=0x3F
    robotMotor.bootloader.lock_bits=0x2F
    
    robotMotor.build.mcu=atmega32u4
    robotMotor.build.f_cpu=16000000L
    robotMotor.build.vid=0x2341
    robotMotor.build.pid=0x8039
    robotMotor.build.usb_product="Robot Motor"
    robotMotor.build.board=AVR_ROBOT_MOTOR
    robotMotor.build.core=arduino
    robotMotor.build.variant=robot_motor
    robotMotor.build.extra_flags={build.usb_flags}
    
    ##############################################################
    
    gemma.vid.0=0x2341
    gemma.pid.0=0x0c9f
    
    gemma.name=Arduino Gemma
    
    gemma.bootloader.low_fuses=0xF1
    gemma.bootloader.high_fuses=0xD5
    gemma.bootloader.extended_fuses=0xFE
    gemma.bootloader.tool=avrdude
    gemma.bootloader.lock_bits=
    gemma.bootloader.unlock_bits=
    gemma.bootloader.file=gemma/gemma_v1.hex
    
    gemma.build.mcu=attiny85
    gemma.build.f_cpu=8000000L
    gemma.build.core=arduino
    gemma.build.variant=gemma
    gemma.build.board=AVR_GEMMA
    
    gemma.upload.tool=avrdude
    gemma.upload.maximum_size=5310
    
    ##############################################################
    
    # Adafruit Circuit Playground 32u4 w/Caterina Configuration
    circuitplay32u4cat.name=Adafruit Circuit Playground
    circuitplay32u4cat.bootloader.low_fuses=0xff
    circuitplay32u4cat.bootloader.high_fuses=0xd8
    circuitplay32u4cat.bootloader.extended_fuses=0xcb
    circuitplay32u4cat.bootloader.file=caterina/Caterina-Circuitplay32u4.hex
    circuitplay32u4cat.bootloader.unlock_bits=0x3F
    circuitplay32u4cat.bootloader.lock_bits=0x2F
    circuitplay32u4cat.bootloader.tool=avrdude
    circuitplay32u4cat.build.mcu=atmega32u4
    circuitplay32u4cat.build.f_cpu=8000000L
    circuitplay32u4cat.build.vid=0x239A
    circuitplay32u4cat.build.pid=0x8011
    circuitplay32u4cat.build.core=arduino
    circuitplay32u4cat.build.variant=circuitplay32u4
    circuitplay32u4cat.build.board=AVR_CIRCUITPLAY
    circuitplay32u4cat.build.usb_product="Circuit Playground"
    circuitplay32u4cat.build.usb_manufacturer="Adafruit"
    circuitplay32u4cat.build.extra_flags={build.usb_flags}
    circuitplay32u4cat.upload.protocol=avr109
    circuitplay32u4cat.upload.maximum_size=28672
    circuitplay32u4cat.upload.speed=57600
    circuitplay32u4cat.upload.disable_flushing=true
    circuitplay32u4cat.upload.use_1200bps_touch=true
    circuitplay32u4cat.upload.wait_for_upload_port=true
    circuitplay32u4cat.upload.tool=avrdude
    circuitplay32u4cat.vid.0=0x239A
    circuitplay32u4cat.pid.0=0x8011
    
    ##############################################################
    
    yunmini.name=Arduino Yún Mini
    yunmini.upload.via_ssh=true
    
    yunmini.vid.0=0x2a03
    yunmini.pid.0=0x0050
    yunmini.vid.1=0x2a03
    yunmini.pid.1=0x8050
    
    yunmini.upload.tool=avrdude
    yunmini.upload.protocol=avr109
    yunmini.upload.maximum_size=28672
    yunmini.upload.maximum_data_size=2560
    yunmini.upload.speed=57600
    yunmini.upload.disable_flushing=true
    yunmini.upload.use_1200bps_touch=true
    yunmini.upload.wait_for_upload_port=true
    
    yunmini.bootloader.tool=avrdude
    yunmini.bootloader.low_fuses=0xff
    yunmini.bootloader.high_fuses=0xd8
    yunmini.bootloader.extended_fuses=0xfb
    yunmini.bootloader.file=caterina/Caterina-Yunmini.hex
    yunmini.bootloader.unlock_bits=0x3F
    yunmini.bootloader.lock_bits=0x2F
    
    yunmini.build.mcu=atmega32u4
    yunmini.build.f_cpu=16000000L
    yunmini.build.vid=0x2a03
    yunmini.build.pid=0x8050
    yunmini.build.usb_product="Arduino Yún Mini"
    yunmini.build.board=AVR_YUNMINI
    yunmini.build.core=arduino
    yunmini.build.variant=yun
    yunmini.build.extra_flags={build.usb_flags}
    
    ##############################################################
    
    chiwawa.name=Arduino Industrial 101
    chiwawa.upload.via_ssh=true
    
    chiwawa.vid.0=0x2a03
    chiwawa.pid.0=0x0056
    chiwawa.vid.1=0x2a03
    chiwawa.pid.1=0x8056
    
    chiwawa.upload.tool=avrdude
    chiwawa.upload.protocol=avr109
    chiwawa.upload.maximum_size=28672
    chiwawa.upload.maximum_data_size=2560
    chiwawa.upload.speed=57600
    chiwawa.upload.disable_flushing=true
    chiwawa.upload.use_1200bps_touch=true
    chiwawa.upload.wait_for_upload_port=true
    
    chiwawa.bootloader.tool=avrdude
    chiwawa.bootloader.low_fuses=0xff
    chiwawa.bootloader.high_fuses=0xd8
    chiwawa.bootloader.extended_fuses=0xfb
    chiwawa.bootloader.file=caterina/Caterina-Industrial101.hex
    chiwawa.bootloader.unlock_bits=0x3F
    chiwawa.bootloader.lock_bits=0x2F
    
    chiwawa.build.mcu=atmega32u4
    chiwawa.build.f_cpu=16000000L
    chiwawa.build.vid=0x2a03
    chiwawa.build.pid=0x8056
    chiwawa.build.usb_product="Arduino Industrial 101"
    chiwawa.build.board=AVR_INDUSTRIAL101
    chiwawa.build.core=arduino
    chiwawa.build.variant=yun
    chiwawa.build.extra_flags={build.usb_flags}
    
    ##############################################################
    
    one.name=Linino One
    one.upload.via_ssh=true
    
    one.vid.0=0x2a03
    one.pid.0=0x0001
    one.vid.1=0x2a03
    one.pid.1=0x8001
    
    one.upload.tool=avrdude
    one.upload.protocol=avr109
    one.upload.maximum_size=28672
    one.upload.maximum_data_size=2560
    one.upload.speed=57600
    one.upload.disable_flushing=true
    one.upload.use_1200bps_touch=true
    one.upload.wait_for_upload_port=true
    
    one.bootloader.tool=avrdude
    one.bootloader.low_fuses=0xff
    one.bootloader.high_fuses=0xd8
    one.bootloader.extended_fuses=0xfb
    one.bootloader.file=caterina/Caterina-LininoOne.hex
    one.bootloader.unlock_bits=0x3F
    one.bootloader.lock_bits=0x2F
    
    one.build.mcu=atmega32u4
    one.build.f_cpu=16000000L
    one.build.vid=0x2a03
    one.build.pid=0x8001
    one.build.usb_product="Linino One"
    one.build.board=AVR_LININO_ONE
    one.build.core=arduino
    one.build.variant=yun
    one.build.extra_flags={build.usb_flags}
    
    ##############################################################
    
    unowifi.name=Arduino Uno WiFi
    unowifi.vid.0=0x2A03
    unowifi.pid.0=0x0057
    
    unowifi.upload.tool=avrdude
    unowifi.upload.protocol=arduino
    unowifi.upload.maximum_size=32256
    unowifi.upload.maximum_data_size=2048
    unowifi.upload.speed=115200
    unowifi.upload.network.endpoint_upload=/pgm/upload
    unowifi.upload.network.endpoint_sync=/pgm/sync
    unowifi.upload.network.sync_return=204:SYNC
    unowifi.upload.network.endpoint_reset=/log/reset
    unowifi.upload.network.port=80
    
    unowifi.bootloader.tool=avrdude
    unowifi.bootloader.low_fuses=0xFF
    unowifi.bootloader.high_fuses=0xDE
    unowifi.bootloader.extended_fuses=0x05
    unowifi.bootloader.unlock_bits=0x3F
    unowifi.bootloader.lock_bits=0x0F
    unowifi.bootloader.file=optiboot/optiboot_atmega328.hex
    
    unowifi.build.mcu=atmega328p
    unowifi.build.f_cpu=16000000L
    unowifi.build.board=AVR_UNO_WIFI_DEV_ED
    unowifi.build.core=arduino
    unowifi.build.variant=standard
    unowifi.build.esp_ch_uart_br=19200
    unowifi.build.extra_flags=-DESP_CH_UART -DESP_CH_UART_BR={build.esp_ch_uart_br}
    

    For micro the new id are VID = 2341, the PID = 0037

  • This worked, thank you!!

    Sam: Yeah I have everything on the same PC; Arduino IDE, Nomad and that's the PC I use to upload the sketches.

     

    For anyone else having the same issue, the Tx and Rx LEDs on the Arduino Micro do now flash properly.