Just built my lighthack box. Buttons work great but my encoders don’t work correctly. If I spin them the corresponding display will only go up or down .300 but then go right back to 0.000. If I spin both the pan and tilt together, the pan and tilt then move up and down nicely... but only if I spin both.
I have checked my wiring and looks good to me.
Any help would be great!
Humor me. What pins do you have each encoder attached to? Make sure you aren't one off. Pics or lists. It really sounds like they are off by one... The light hack kit looks like it's specifying pins A0, A1 and A3, A4 for the encoders in the drawing which matches what is in the sketch.
