Fader Bank

Is there any way of getting Nomad to report which Faders have something loaded onto them and what that something is… i.e. a Cue List or a Sub?

Hello, yes if you init the faders, you can get the info from the faders, if it is a Sub, GM etc. I played with it al little bit in the last month. I can get it to work on two faders, display the info on a LCD or a little Oled display, but after that the Arduino won't proces the info. Using text info and commands, and proces it on a Arduino is not very straight forward. I don't know if you are better with coding, happy to send you my progress this far.  I was also thinking giving the faders a color, GM red Sub yellow, Cuelist & Cross fader green etc. But fist it would be very nice to get 10 faders to work instead of only two. My feeling is you have to abandon the Arduin all together, but that is just a feel. 

Hi DJ111

Switching on Incoming OSC & Outgoing OSC on the Diagnostic Tab I can see when the FaderWing initialises that it’s sending info to Nomad about its faders but I don’t see Nomad sending any of its fader config info back to the FaderWing.

I’d like to use an RGB LED for each fader on my FaderWing and set the colour according to what’s loaded on the equivalent fader in Nomad. i.e. Green for a CueList, Red for a Sub etc.

I don’t know how to get the fader config info from Nomad so yes, it would be great if you could share your work! :)

Thank You

Roddy

Hi DJ111

Switching on Incoming OSC & Outgoing OSC on the Diagnostic Tab I can see when the FaderWing initialises that it’s sending info to Nomad about its faders but I don’t see Nomad sending any of its fader config info back to the FaderWing.

I’d like to use an RGB LED for each fader on my FaderWing and set the colour according to what’s loaded on the equivalent fader in Nomad. i.e. Green for a CueList, Red for a Sub etc.

I don’t know how to get the fader config info from Nomad so yes, it would be great if you could share your work! :)

Thank You

Roddy