X-Spot & X-Spot Xtreme Gobo Index

Hello
I´m a HES User in Austria.

So i just have a problem with my Gobo Index.
I don´t know if it is a really problem but it would save programming time if there is there something to solve.

We often use a custome Gobo so we have to project his Logo on a Wall in the right place.
so I use the index to rotate the gobo in the right direction.
Than i save that scene on HOG III.

If i recal that scene: Everything is OK. BUT the Index is not on the right pos.
I already checked the output DMX Value on the HOG III. That value is the same as programmed. I also tryed it with an Avolite Pearl 2000.
Same problem.

Can anybody explain me that problem.
best regards Daniel
Parents
  • 0
    OK
    may be i didn´t explained it well.

    there is definitely no mechanical fault.
    No play in the Wheels, no movement of the gobos in the wheels.

    It must be something in the programming of the Fixture.

    Teerickson is asking the right question.
    I think is on the right way to help me.

    Does anybody of you have time to try this with his one X-Spot?
    Than you will know what i mean.

    Take the broadband (for example better to see) and record a cue at a sharp corner (so that you have to set the index)
    Clear the scene or cue.
    Idle the fixture

    And now recal the cue!
    Now you will see that the Broadband is slightly (1-3 Deg) of the sharp corner. (I just talk about the Index Pos. all other functions are correctly)

    Please take a time and try it!

    best regards Daniel
Reply
  • 0
    OK
    may be i didn´t explained it well.

    there is definitely no mechanical fault.
    No play in the Wheels, no movement of the gobos in the wheels.

    It must be something in the programming of the Fixture.

    Teerickson is asking the right question.
    I think is on the right way to help me.

    Does anybody of you have time to try this with his one X-Spot?
    Than you will know what i mean.

    Take the broadband (for example better to see) and record a cue at a sharp corner (so that you have to set the index)
    Clear the scene or cue.
    Idle the fixture

    And now recal the cue!
    Now you will see that the Broadband is slightly (1-3 Deg) of the sharp corner. (I just talk about the Index Pos. all other functions are correctly)

    Please take a time and try it!

    best regards Daniel
Children
No Data
Related

www.etcconnect.com