Cyberlight "tricks"?

Does anyone knows any "trick" to change the dim1 motor without taking out all the fixture´s components?
Parents
  • If you do change them, do them one at a time paying close attention to the height of the flag on the motor. You must put the flag on the new motor exactly where it was before or flags will collide causing major failure and broken dicros.:nono: After assembly pull all the flags in together and make sure none touch. Check each color carefully. Then check as a whole.
    Take your time, check it all twice. You will be glad you did.:D

    ** color flags only go in one way!! Reverse them and you will soon be tearing the unit back down and replacing color flags. Mark the arm on the side away from the lamp to ensure you dont make this mistake.
Reply
  • If you do change them, do them one at a time paying close attention to the height of the flag on the motor. You must put the flag on the new motor exactly where it was before or flags will collide causing major failure and broken dicros.:nono: After assembly pull all the flags in together and make sure none touch. Check each color carefully. Then check as a whole.
    Take your time, check it all twice. You will be glad you did.:D

    ** color flags only go in one way!! Reverse them and you will soon be tearing the unit back down and replacing color flags. Mark the arm on the side away from the lamp to ensure you dont make this mistake.
Children
No Data
Related