I'm just trying to fix the LAD's on some technobeams. I got some 5mw lasers and they are a little bigger then the stock mounts. I made some mounts that fit nicely, BTW they are 5v and when I plug them strait into the lead coming from the pcb they don't come on? on the stock setup there is a small board that the LED is on, I thought that the res,cap,dio where just for the LED but guest I was wrong! dose anyone have a schematic for this small board? The reason is that one of the lights did not have a LAD. It seems that I could make it with some parts laying around.
suggestion: ditch the 5mw and install a 1 watt with its own controller and cooling module. You could burn out retinas within 1000 meters. You could mount the technobeams on a turret and have the best battle-light rig in the industry.
suggestion: ditch the 5mw and install a 1 watt with its own controller and cooling module. You could burn out retinas within 1000 meters. You could mount the technobeams on a turret and have the best battle-light rig in the industry.
