I've just got some studio color 575's and they are the M model. from what I've read they can run 208v-230v, the labels say 208v only? I don't have a 208v in my shop to test them and before I fry some thing I figured I better ask before I plug them up. also I saw in the manual (I think thats where) that they can be re-taped to run 110v?
Could be a bad lamp wire, might be the ignitor in the arm. If you see 30v going into the ignitor but no strike, it might be a bad lamp wire considering the age of the unit. Check the primary input voltage at strike. Avoid the secondary side as it will fry your meter!:eek: :nono:
Could be a bad lamp wire, might be the ignitor in the arm. If you see 30v going into the ignitor but no strike, it might be a bad lamp wire considering the age of the unit. Check the primary input voltage at strike. Avoid the secondary side as it will fry your meter!:eek: :nono:
