The lens is getting caught on the bezel when focus is at 255. The lens guides do not appear to be bent. Swopping with other bezels doesn't help either. Any thoughts?
UPDATE!! I've been pimpn' a few more studio spot 250s and found and easier and less ......harsh way to make this work. look at pic #1 and you can see the stock mount on the left and the pimped side is on the right. what I did in case you can't tell was get 3 screws 1/2" long and 3 1/4" nuts these are used as spacers and 3 lock washer. in pic 2 you see the lens assy on the unit,note that you can put the "C" clips back on top of the post. In pic #3 you can see how much the lens sticks out with the cover on. The 4 pic is a gobo on the f/x wheel in focus!!
UPDATE!! I've been pimpn' a few more studio spot 250s and found and easier and less ......harsh way to make this work. look at pic #1 and you can see the stock mount on the left and the pimped side is on the right. what I did in case you can't tell was get 3 screws 1/2" long and 3 1/4" nuts these are used as spacers and 3 lock washer. in pic 2 you see the lens assy on the unit,note that you can put the "C" clips back on top of the post. In pic #3 you can see how much the lens sticks out with the cover on. The 4 pic is a gobo on the f/x wheel in focus!!
