Sola HyBeam2000 Zoom Angle Mode

Question

Hi, 
 There is a Beam Mode and a Wash Mode option in the specs sheet. The difference between are two zoom angles (7-38D and 10-46D). 
 In the Manual is no option discribed how to switch the modes and in the EOS Fixture Library is only one Template with Zoom Range 5-45D. 
 I need to know the right Beam Angle because i have to switch some SolaWash 2000 to the HyBeams2000. 
 
 Thanks for Help 
 S. Frank

Joe Haller · Accepted Answer

HI Stefan, 
 "Wash mode" is created by inserting the frost flags. If you need the full DMX table you can find it here, https://www.etcconnect.com/WorkArea/DownloadAsset.aspx?id=10737503854 
 Cheers, 
 Joe

Markus Strobel · Answer

Hey Stefan, The fixture was made to be a wash light, but also the beam because of the gobo wheel. You will need to have a way to focus on the gobos. Beam Angle Range 7&deg;&ndash;38&deg; is the range you be able to get focus on the gobos and Wash Angle Range 10&deg;&ndash;46&deg; is the wash range. :-) About the DMX Table, there is only the 39 CH Mode ;-) Cheers, Markus

Sola HyBeam2000 Zoom Angle Mode

Top Replies