Sola HyBeam2000 Zoom Angle Mode

Wow, what a mystic light.

1. The Manual on the Webside has a detailed DMX Table that is broken, because the last 1/3 of content is missing. (The DMX chart PDF helps)

2. In the Manual i can read smoething about "Beam angle: zoom from 8.5 -38.5"

3. if i search the Manual about Zoom/Angle, nearly nothing is found

4. if i serach the manual about wash/spot NOTHING is found

5. EOS Fixtures states zoom from 5-45

6. The Datasheet tells me "Extremely powerful 7°–46° zoom" on Page 1
and "Beam Angle Range 7°–38° Wash Angle Range 10°–46° " on Page 2

Manual from the ETC Webside "Version 1.3 -- Revision A"
Datasheet from ETC Webside "Datasheets | C, 03-2021 | English"

-- 

Stafan, yout hit a jackpot by finding this.
Maybe you should swap over to a HyBeam 3000.
It should have a "Extremely powerful 4.5°-50° Zoom"
But it is a bit brighter.

HI Stefan,

"Wash mode" is created by inserting the frost flags. If you need the full DMX table you can find it here, https://www.etcconnect.com/WorkArea/DownloadAsset.aspx?id=10737503854

Cheers,

Joe 

Both Frost flags?

Frost 1

Thanks for fast reply.

Now i can modify the Fixture Template so that the HyBeam will do the job of the Wash2000 as close as possible.

Hey Stefan,

The fixture was made to be a wash light, but also the beam because of the gobo wheel. You will need to have a way to focus on the gobos.
Beam Angle Range 7°–38° is the range you be able to get focus on the gobos and Wash Angle Range 10°–46° is the wash range. :-)
About the DMX Table, there is only the 39 CH Mode ;-) 

Cheers,
Markus